SV650.org - SV650 & Gladius 650 Forum
Page 4 of 6 123 4 56
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   neutral light does not work (http://forums.sv650.org/showthread.php?t=152208)

Miss_Undaztood 26-05-10 05:04 PM
Re: neutral light does not work
 
Exactly, same as the diagram I have. So the black/white earth goes to the gear position switch, comes out of there to the relay as a blue wire, then the blue/black comes from the relay up to the neutral light, still earth.
The positive for the bulb will be wired inside the clocks or part of a circuit board.

Edit: Yup thats the exact diagram I was using.

yorkie_chris 26-05-10 05:09 PM
Re: neutral light does not work
 
Connect that blue/black to earth, light should illuminate. Simple.
If it does not your problem is within the light... probably that it is not getting power if you confirmed bulb works.

Sure I said this about 2 hours ago.

barwel1992 26-05-10 05:10 PM
Re: neutral light does not work
 
hmm ok then that i will try and run a lead strait from the battery to the bulb the problem i will then have is i need to mutilate the trail tech plugs because they force you to share ground and that wont work if you have to use a separate ground

yorkie_chris 26-05-10 05:12 PM
Re: neutral light does not work
 
That blue/black IS the ground for that fookin bulb

+ve terminal in battery
signal fuse
clocks
bulb for neutral light
blue black wire
relay
switch
black/white wire from switch
-ve on battery

That is order power follows.

barwel1992 26-05-10 05:15 PM
Re: neutral light does not work
 
Quote:
Originally Posted by yorkie_chris (Post 2279096)
Connect that blue/black to earth, light should illuminate. Simple.
If it does not your problem is within the light... probably that it is not getting power if you confirmed bulb works.

Sure I said this about 2 hours ago.
the problem is YC if the blue/black is earth then i dont have a positive to give the bulb power unless i run the power from the ignition or battery

barwel1992 26-05-10 05:18 PM
Re: neutral light does not work
 
Quote:
Originally Posted by yorkie_chris (Post 2279101)
That blue/black IS the ground for that fookin bulb

+ve terminal in battery
signal fuse
clocks
bulb for neutral light
blue black wire
relay
switch
black/white wire from switch
-ve on battery

That is order power follows.
i get it lol

i will go and try it but still not sure where to get power from

yorkie_chris 26-05-10 05:22 PM
Re: neutral light does not work
 
Find a wiring diagram or instructions or something for clocks.

yorkie_chris 26-05-10 05:23 PM
Re: neutral light does not work
 
Quote:
Originally Posted by barwel1992 (Post 2279105)
the problem is YC if the blue/black is earth then i dont have a positive to give the bulb power unless i run the power from the ignition or battery
I am surprised if clocks do not have this built in as the majority of bikes use same neutral light system.
If they do not have it built in there MUST be a wire for it!

Miss_Undaztood 26-05-10 05:24 PM
Re: neutral light does not work
 
Take your old clocks to bits and see where it takes it from originally by working back, or just take a tap from the red/white or orange/green I think the colours are. They both seem to be ign positives.

yorkie_chris 26-05-10 05:27 PM
Re: neutral light does not work
 
Use "signal" fuse IIRC.


All times are GMT. The time now is 05:08 PM.
Page 4 of 6 123 4 56
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.