Spark plug change - how?
Do I have to remove the radiator to change the front plug?
K3 650 N |
Re: Spark Plug Change ??
on my 99reg you just loosen the bolts and remove the horn, then prop the rad forward with a chunk of wood. bit awkward to do but not hard :)
|
Re: Spark Plug Change ??
Quote:
|
Re: Spark Plug Change ??
I have a K3 S and no you don't need to - undo the bottom bolts and swing up and the rad then use the spark plug tool in the tool kit (plus a pair of pliers on the top to start) and it'll come out
|
Re: Spark Plug Change ??
What others said....remove lower bolts, tilt radiator forward...
and.... Quote:
This is a must for removing the spark plug without taking the radiator off. |
Re: Spark Plug Change ??
use a fuel rubber hose to pull the plug from the hole once losened.
|
Re: Spark Plug Change ??
Take the horn off, it gives you loads more room.
|
Re: Spark Plug Change ??
i changed my spark plugs on my injected model and all i done was take the 2 bolts of the rad i did not remove it completely and it worked very well and was very easy 2 do!!;)
|
Re: Spark Plug Change ??
Cheers I did it easily just tilting it forward like you all advised. Thanks loads.
|
Re: Spark Plug Change ??
I find although you can tilt the rad, I prefer to drop the coolant. That way you get new plugs and new coolant and not so much risk of damaging the rad!
|
All times are GMT. The time now is 04:50 PM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.