SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   low beam working intermittently. (http://forums.sv650.org/showthread.php?t=154665)

Dave20046 14-07-10 06:46 PM

low beam working intermittently.
 
My lowbeams have stopped working on the pointy sv650s. for the last month the gearside light has been working intermittently (but whenever it failed I just put high beam on) then last week both went out for a stint of riding but they had come back on by the time we stopped up. Now they're not working at all (apart from on high beam).

Any ideas? Sounds very loose connectiony to me but is there a 'low beam' wire/where/what to check?
Going to take apart the switchgear but I'm crap with electrics so any other ideas would be a big help.

Cheers in advance

Razor 14-07-10 06:54 PM

Re: low beam stopped working
 
simple stuff first, change the lamp, check fuses for good connection

Dave20046 22-07-10 06:59 PM

Re: low beam stopped working
 
all checked :(

andrewsmith 22-07-10 08:39 PM

Re: low beam working intermittently.
 
check you aint got a duff connection at the handle bars or fuses make sure the relay is in properly

Dave20046 23-07-10 06:53 PM

Re: low beam working intermittently.
 
Some mods have too much time on their hands!
They were working intermittently - now they have stopped working as per original thread title.

Anyhow, double checked fuses and theres no snags or tears in the wiring - does anyone happen to know the colour of the 'low beam' wire? Or any block connectors that it goes through?

Cheers

Dave20046 23-07-10 06:59 PM

Re: low beam working intermittently.
 
oops, got it - white wire.

Holdup 23-07-10 07:00 PM

Re: low beam working intermittently.
 
http://bolty.net/wp-content/uploads/...lor_wiring.jpg

White by the looks of things

Edit: ah you found it

yorkie_chris 23-07-10 07:03 PM

Re: low beam working intermittently.
 
feed goes from fusebox into right switches (switch normally closed, opens when starter button is pressed), then goes back into loom and to left switchgear (2pos switch hi/lo, soldered wires in feed to switch to allow pass switch to bypass it)

Dave20046 23-07-10 07:05 PM

Re: low beam working intermittently.
 
Quote:

Originally Posted by yorkie_chris (Post 2327336)
feed goes from fusebox into right switches (switch normally closed, opens when starter button is pressed), then goes back into loom and to left switchgear (2pos switch hi/lo, soldered wires in feed to switch to allow pass switch to bypass it)

ah - didn't check the right hand switch gear. worth a checkles

Dave20046 23-07-10 07:27 PM

Re: low beam working intermittently.
 
cheers anyway holdup useful 4 future reference.

What I don't understand is why the left one went first :scratch:
The left light had been intermittent for a couple of months...before they both went. hmm

R/H switch seems fine :(


All times are GMT. The time now is 01:24 PM.

Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.