Brakes
Hi guys, as you probably know I got my SV the other day. The front brake feels weird though, when I pull the lever in it doesn't pull in smoothly unless i pull it really hard. It kinda crunches... I dont really know how to describe it... I changed the setting ont he lever from 5 to 1 and this made a slight difference... what else can I do?
Cheers JakeRS |
put a dab of grease on the end of the brake level where it pushes against the master cylinder piston.(near the pivot point of the brake lever.)
|
the master cylinder eh... i honestly have no idea what that is! :lol:
|
Look at the left of the brake lever. It presses on a piston when you squeeze the brake. Thats the master cylinder. Grease the bit where the metal lever presses on the rubber cover.
Hope that makes sense :? |
Definitly dont start touching anything to do with brakes.
Jake, if you can live with it until you come to one of the meets, then we'll take a look at it for you. |
yeah i can live with it, just keep accidently locking the back wheel up using too much rear... :?
not sure when i'm gonna be able to get up to a meet... my work hours are VERY flexible... :( |
The lever pivot needs a lube, Get some silicone spray and give it heaps. You will be as surprised as I was.
|
again... which bits the lever pivot :shock: :roll:
im guessing the pivot on the lever but u never know :wink: |
All times are GMT. The time now is 03:26 PM. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.