SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Oil sump bolt, turn left or right (http://forums.sv650.org/showthread.php?t=109778)

MiniMac 07-05-08 12:18 PM

Oil sump bolt, turn left or right
 
To get it off? Seems to be on REALLY tight.

So, sitting on the bike, turn to left or right?

blueto 07-05-08 12:23 PM

Re: Oil sump bolt, turn left or right
 
righty tighty as they say

Stig 07-05-08 12:24 PM

Re: Oil sump bolt, turn left or right
 
It's a clockwise thread as all the rest of the bolts on the bike. Turn it anti-clockwise as looking from underneath to undo.

Grinch 07-05-08 12:25 PM

Re: Oil sump bolt, turn left or right
 
If you do get it off, check the thread on it and maybe even get the copper washer replace, incase someone has over done it.

northwind 07-05-08 12:56 PM

Re: Oil sump bolt, turn left or right
 
Lefty loosey, righty tighty :D (with just a couple of exceptions on the SV, and one of those is inside the engine and safely hidden) But it's really, really easy to get this the wrong way round when working at odd angles, I like to use a ratchet on this sort of location so I can set the direction first then there's no risk of messing up.

MiniMac 07-05-08 01:08 PM

Re: Oil sump bolt, turn left or right
 
Yeah, once I got the 6tooth socket rather than 12 it was a easy task.

Need to get a filter wrench though, I can't get it off. Put a screwdriver through it, but it won't budge.

Stig 07-05-08 01:13 PM

Re: Oil sump bolt, turn left or right
 
Quote:

Originally Posted by MiniMac (Post 1501503)
Yeah, once I got the 6tooth socket rather than 12 it was a easy task.

Need to get a filter wrench though, I can't get it off. Put a screwdriver through it, but it won't budge.

Get a longer screwdriver and punch all the way through and back out again. You can then use the filter as a lever against it's self as leverage.

Grinch 07-05-08 01:32 PM

Re: Oil sump bolt, turn left or right
 
Quote:

Originally Posted by BigApe (Post 1501514)
Get a longer screwdriver and punch all the way through and back out again. You can then use the filter as a lever against it's self as leverage.

I do the same... who did your servicing last time as it sound like they rammed everything on over tight.

MiniMac 07-05-08 01:43 PM

Re: Oil sump bolt, turn left or right
 
Quote:

Originally Posted by Grinch (Post 1501529)
I do the same... who did your servicing last time as it sound like they rammed everything on over tight.

A dealership near St Helens,

I've only been riding it a few weeks, I'll be doing most of my own servicing. Once I've got all my daft questions out the way, I'm quite good. Know my way around a car engine so time to move to bikes too :)

Have sourced a feck off screwdriver, so I'll get that through and see. Halfrauds is open till 8 anyway. Won't be able to make the Scotch Piper tonight though :(

Stig 07-05-08 03:19 PM

Re: Oil sump bolt, turn left or right
 
I never have to use anything to get my filter off other than a bit of elbow grease.


All times are GMT. The time now is 06:15 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.