SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Bikes - Talk & Issues (http://forums.sv650.org/forumdisplay.php?f=129)
-   -   how to get the sump plug/bolt or filter bolt out without murdering someone? (http://forums.sv650.org/showthread.php?t=111270)

Paul the 6th 30-05-08 06:10 PM

how to get the sump plug/bolt or filter bolt out without murdering someone?
 
further to my last thread here: http://forums.sv650.org/showpost.php...9&postcount=16

i can't seem to get the sump plug bolt or filter nut loose. They won't budge and I've broken about 4 tools whilst attempting to get these feckers out. Does anyone have any good tips for getting these out before I murder someone (probably the bast who designed these fixings)...


ta pt6

leatherpatches 30-05-08 06:26 PM

Re: how to get the sump plug/bolt or filter bolt out without murdering someone?
 
IIRC there's a filter nut tool (but I might be wrong).

I'd try both with a warm engine, to be honest. Better changing the oil that way, too.

kwak zzr 30-05-08 07:00 PM

Re: how to get the sump plug/bolt or filter bolt out without murdering someone?
 
they SHOULD'NT be that tight? who did the last service?

leatherpatches 30-05-08 07:20 PM

Re: how to get the sump plug/bolt or filter bolt out without murdering someone?
 
Turning the right way I hope!

Toby 30-05-08 07:22 PM

Re: how to get the sump plug/bolt or filter bolt out without murdering someone?
 
righty tighty lefty loosey!

GMS 30-05-08 10:58 PM

Re: how to get the sump plug/bolt or filter bolt out without murdering someone?
 
Did you sort this Paul ? Ive got a filter removal tool ( large socket that fits the end of the filter to turn it ) if you need to borrow it text me in the morning and I can pop it over for you. I`l PM my mob. number to you.
Graham

Paul the 6th 30-05-08 11:01 PM

Re: how to get the sump plug/bolt or filter bolt out without murdering someone?
 
In the end I fecked it off and went to see sex in the city movie. I remember the mantra righty tighty lefty loosey but completely disengaged the conversion when it comes to upside down bolts :( Think I might have been trying to tighten them up for an hour or so...

luckily the sump bolt didn't rotate at all, the oil filter turned about half a turn so we'll have to see. I'll give you a shout if i get stuck graham - thanks in advance!

ThEGr33k 30-05-08 11:04 PM

Re: how to get the sump plug/bolt or filter bolt out without murdering someone?
 
Mine was a bitch on the prilla. Must be some people love to over tighten them so no oil EVER comes out... Sigh. Just pull and pull as hard as you can untill it lets go all of a sudden and you skin your knuckles. Thats what I did. :D

leatherpatches 31-05-08 05:25 AM

Re: how to get the sump plug/bolt or filter bolt out without murdering someone?
 
I did wonder if you were having that much trouble. I hope you haven't caused any mischief by tightening it up too much.

Now for the important question: why the hell did you watch SITC? Horrible girly flick that it is!

Flamin_Squirrel 31-05-08 07:53 AM

Re: how to get the sump plug/bolt or filter bolt out without murdering someone?
 
Do you have a ratchet? Always the best tool to use in these situations, as you can check whether it's set to do up/undo before you get under the bike.


All times are GMT. The time now is 04:06 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.