Clutch Cover
 

Hi,
Anyone know of any aftermarket clutch covers available for the curvy sv? and roughly how much they go for?
I've contacted a fellow on a german site about one with a window in it but he said that he isnt going to make any until there are 10 buyers ready.
If anyone wants one let me know and i'll start making a list, other than that what other options are there? is there any off of other bikes that fit?
cheers
dan

Re: Clutch Cover
 

there is bunch of them available in USA.round clutch cover only,not whole side.

Re: Clutch Cover
 

meaning? do you just mean that the cover is available but just the clutch one, not the side engine casing aswell?

Re: Clutch Cover
 

Yes just the clutch, early Curvy's have separate clutch covers. They are made from Aluminium and two at least come with a crash bung, one plastic and one steel.

http://www.jhsracing.co.uk/archive/e...cov_S36_RH.jpghttp://www.jhsracing.co.uk/archive/e...over_small.jpghttp://www.jhsracing.co.uk/archive/e...over_small.jpg

These three are available from JHS, problem is there are reports of condensation building up behind them and contaminating the oil in our lovely British climate!

Re: Clutch Cover
 

right.clutch cover is just round piece.engine cover is whole side.
I think there is guy on svrider that installs window it them,not sure tho.

Re: Clutch Cover
 

never had problem with condensation.
some covers like factory pro have casing for bolts inside that gets in the way if you use slipper clutch.

Re: Clutch Cover
 

I doubt i'll ever go for a slipper.. I blip.
I asked JHS about the woodcraft one and they said it was like £170+VAT which is a bit steep, I recon i might just get their cheap billet one.
What else is available? are there no other suzuki model covers that fit?
cheers
dan

Re: Clutch Cover
 

Nope.

I had the condensation effect the 750, never had a problem with the OEM plastic one fitted. Several others have had the same problem, 650's and 700's. Problem reoccurred when I refitted the Factory Pro one again after crash damage ruined the OEM one.

Re: Clutch Cover
 

hmmm... the woodcraft one looks nice... how much clearance does the standard cover leave?
cheers
dan

Re: Clutch Cover
 

Are you on about ground clearance, if so you will not have a problem with any touching the deck (unless you crash).