SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
Hi,
Anyone know of any aftermarket clutch covers available for the curvy sv? and roughly how much they go for? I've contacted a fellow on a german site about one with a window in it but he said that he isnt going to make any until there are 10 buyers ready. If anyone wants one let me know and i'll start making a list, other than that what other options are there? is there any off of other bikes that fit? cheers dan |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
there is bunch of them available in USA.round clutch cover only,not whole side.
|
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
meaning? do you just mean that the cover is available but just the clutch one, not the side engine casing aswell?
|
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
Yes just the clutch, early Curvy's have separate clutch covers. They are made from Aluminium and two at least come with a crash bung, one plastic and one steel.
![]() ![]() ![]() These three are available from JHS, problem is there are reports of condensation building up behind them and contaminating the oil in our lovely British climate! |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
right.clutch cover is just round piece.engine cover is whole side.
I think there is guy on svrider that installs window it them,not sure tho. |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
never had problem with condensation.
some covers like factory pro have casing for bolts inside that gets in the way if you use slipper clutch. |
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
I doubt i'll ever go for a slipper.. I blip.
I asked JHS about the woodcraft one and they said it was like £170+VAT which is a bit steep, I recon i might just get their cheap billet one. What else is available? are there no other suzuki model covers that fit? cheers dan |
![]() |
![]() |
#8 | |
Guest
Posts: n/a
|
![]() Quote:
I had the condensation effect the 750, never had a problem with the OEM plastic one fitted. Several others have had the same problem, 650's and 700's. Problem reoccurred when I refitted the Factory Pro one again after crash damage ruined the OEM one. |
|
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]()
hmmm... the woodcraft one looks nice... how much clearance does the standard cover leave?
cheers dan |
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
bloody clutch cover | AndyBrad | SV Talk, Tuning & Tweaking | 42 | 03-03-09 08:22 PM |
Leaking Clutch Cover | TheShadow | SV Talk, Tuning & Tweaking | 2 | 16-02-09 04:30 PM |
Clutch cover 01 Curvy | jumjum_0214 | Stuff Wanted | 9 | 10-10-08 05:08 PM |
Clutch cover. | scottjames | SV Talk, Tuning & Tweaking | 8 | 16-04-08 11:30 AM |
clutch cover leaking | habbie | SV Talk, Tuning & Tweaking | 0 | 06-05-07 02:07 PM |