puttng motrax bar end mirrors on.
 

I recently bought motrax bar end mirrors for my sv, i thought to myself this should be easy to set up.. just use a phillips screwdriver to take off the bar ends and bish bash bosh your done!
But as i took my screwdirver to take off the barends i hit a problem either my bar ends dont come off or i am way too weak becuase those things just wont budge, i put WD40 on them and left it overnight and they still wont budge, anyone got any ideas? do i need to use a power drill or something like that?

btw my bike is a sv650 K3 Naked

Re: puttng motrax bar end mirrors on.
 

They can be stiff. HAve you got phillips bits you can use with a ratchet? Or an impact driver?

Re: puttng motrax bar end mirrors on.
 

i may have one for rachet, dont even have a impact driver -_- i think i may just have summon godly stregnth and go at it again :x

Re: puttng motrax bar end mirrors on.
 

Impact driver, or some mole grips and try to unscrew the whole bar end

Re: puttng motrax bar end mirrors on.
 

gonna try the mole grips to take the whole thing off.

Re: puttng motrax bar end mirrors on.
 

Ah thanks i used the mole grips on the whole thing and it worked, thanks for the help.

Re: puttng motrax bar end mirrors on.
 

Yeah I'm having the same problem with mine and want to take them off to either paint or get new ones so will give the moley's a bash

Re: puttng motrax bar end mirrors on.
 

just go at it with everthing you got :P but if you have renthal bar ends then u can just put the mirro round it, that what i did :)

Re: puttng motrax bar end mirrors on.
 

Shocking your screwdriver with a hammer can often work if you're not in posession of an impact driver. Also, Plus Gas is probably the best penetrative oil out there, and isn't that pricey. Plus you'll easily get your usage out of it.

I got a seized rear spindle out of r lass's 125 using Plus Gas, it's very good stuff.

Re: puttng motrax bar end mirrors on.
 

Did you get anywhere with your bar end then?