High Level system fitted
 

Thanks Lee, recieved yesterday, fitted today. I've had to move my indicators & it was a bugger to fit, but it's now on. Trouble is, I don't know if I like it now :(
I'll see if it grows on me.
http://i5.photobucket.com/albums/y17...g?t=1243099061

Re: High Level system fitted
 

was thinking of getting a high level link pipe for my curvey m8, looks good how much work was it to move the indis ????? do you have a photo of the back to see where you have moved them pls

Re: High Level system fitted
 

my indicators didnt need to be moved with a high level can, though it is a blue flame. May be worth putting the pillion footrests back on as they help to protect the can in an off.

Re: High Level system fitted
 

I would chop the can in half. It'll look better, get rid of the dent, won't foul the indi, and sound better :thumbsup:

Re: High Level system fitted
 

+1

same here mr c-i'd chop it to the rear of the indy, will finish the look off nicely

husky

Re: High Level system fitted
 

chop off about three inches, and make it nice n tidy, in fact just chop it to the end right of the Fuel logo, would be a nice place to stop. Mines about that length, then the indies just sit a fag papers width off the outlet.

Re: High Level system fitted
 

Yeh 1up to all above, it's too long, but it could look great ;) Kinda brave going high level, i'm not sure if it works on a curvy, we'll see! WIP i hope.

Re: High Level system fitted
 

It works very well on a curvy.....mines been there for a year or three now.
My link pipes a bit different, but it was a custom pipe, it curves right up, so that the can just clears the rails on the subframe, stops just short of the plastics melting:smt120

Re: High Level system fitted
 

I hate to say it.... but isnt that link pipe upside down...?
The heat shield is supposed to be by your boot...

Re: High Level system fitted
 

possibly Speedplay, but then theres no pillion pegs in the pic, so if there was, would it protect the pillions boots?