SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   oiler not oiling? (http://forums.sv650.org/showthread.php?t=132440)

DaveP 23-05-09 07:44 PM

oiler not oiling?
 
Just fitted the scottoiler to my bike, But it does not appear to be working.... as far as i can see its fitted correctly.

Any suggestions as to why it may not be working? any common mistakes??

cheers

Dave

Bibio 23-05-09 07:46 PM

Re: oiler not oiling??
 
you need to purge the system of all air... if there is air in the pipes it wont work properly ...
you have connected the vacuum pipe?

DaveP 23-05-09 08:08 PM

Re: oiler not oiling??
 
yes... all pipes connected and no air in the pipe at all....


how long should it take for the feed to begin to drip??

Bibio 23-05-09 08:27 PM

Re: oiler not oiling??
 
well when you start the bike it should drip every 10 seconds or so... you have been running the bike to check haven't you....

fizzwheel 23-05-09 08:29 PM

Re: oiler not oiling??
 
You need to twiddle the dial on the end of the resevoir to the "prime" setting. Start the enigne the oil will flow slowly along the tube to the dispenser down by the rear sprocket.

You can hurry the process along by doing the above and blowing through the breather tube.

Just be patient with it, if you have it all connected up properly then it will start to flow.

mustnt grumble 23-05-09 09:26 PM

Re: oiler not oiling??
 
Quote:

Originally Posted by Bibio (Post 1918418)
well when you start the bike it should drip every 10 seconds or so... you have been running the bike to check haven't you....

Really? I thought 1-2 drops per minute was recommended.

DaveP 23-05-09 10:21 PM

Re: oiler not oiling??
 
well i checked and double checked and everything i had done appeared correct.. then i noticed something... It didnt seem right... (Now bear in mide that this is the first time i have ever seen one of these thing up close.)

Turns out that the steel bar has jammed into the end of the Black plastic nozzle inside the pipe!!! I was under the impression the metal pipe was hollow as this is how it was when i opened the box...:rolleyes::rolleyes:


sorted now.... Done!


Cheers guys

Dave

Jamiebridges123 23-05-09 11:33 PM

Re: oiler not oiling??
 
Scottoilers are incredibily simple. Took me 15 minutes to install...

Hardest thing was bending the metal thing and the little black injector nozzle so they stay on the bloody sprockets! ARGH.

Luckypants 26-05-09 09:32 AM

Re: oiler not oiling?
 
Well done Dave, was looking at your chain the other day thinking 'Tut tut!' :D

how much did you pay for your Scotty by the way, looking for one at the moment but £70 odd seems rather steep.


All times are GMT. The time now is 11:47 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.