![]() |
Scottoiler fitting.
I recently got a Scottoiler vSystem from www.scottoiler.com for my SV650S k9. Now i the only problem i have fitting the thing is, trying to find the vacuam connection on the engine, if anyone could help me by telling me where it is i would be most grateful
thanks nick |
Re: Scottoiler
quite easy to locate (well once you know where to look!) - on the throttle bodies there are a couple of 'spigots' with rubber caps. from memory 2 on the rear and 1 on the front.
i took mine from one of the ones on the rear so that i couls still use the other when balancing throttle bodies. Look through the left or right hand side of frame for a small rubber cap, its hard to explain but you should find it ok. |
Re: Scottoiler
by the way if you not already decided where to put the resevoir i put mine under the pillion seat attached to the subframe - it's ok except a little bit of a pian to get to when filling up. depending how many mile you do you might decide to put elsewhere.....
|
Re: Scottoiler
If I can remember rightly when i helped fit my brothers, the vacuum connections are inside the 'V' if you get my meaning, capped by little rubber nipples (for want of a better word lol)
Look in the centre of the picture and you will see them. HTH :) http://images20.fotki.com/v366/photo...ICT0073-vi.jpg |
Re: Scottoiler fitting.
that is so funny i was just doing the same thing and found this
http://www.fookstar.com/?q=node/199 I'm fitting mine tomro |
Re: Scottoiler fitting.
Ha yeah that's funny. Google image search was where I pulled that from :)
|
Re: Scottoiler
Quote:
|
Re: Scottoiler fitting.
All fitted now thanks for everyones help.
|
Re: Scottoiler fitting.
good m8,, not done mine yet tomro, did u have any problems &did u have to take any fairing off
|
Re: Scottoiler fitting.
Quote:
|
All times are GMT. The time now is 03:07 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.