SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Stuff Wanted (http://forums.sv650.org/forumdisplay.php?f=114)
-   -   Delivery pipe for Scottoiler (http://forums.sv650.org/showthread.php?t=146202)

DarrenSV650S 04-02-10 10:12 PM

Delivery pipe for Scottoiler
 
I must have had the delivery pipe pressed on to the disc too hard because it has worn right through the side of the pipe :o

Does anyone have a spare one?

Luckypants 04-02-10 11:34 PM

Re: Delivery pipe for Scottoiler
 
Quote:

Originally Posted by DarrenSV650S (Post 2171761)
I must have had the delivery pipe pressed on to the disc too hard because it has worn right through the side of the pipe :o

Does anyone have a spare one?

A few pennies from the Scottoiler website, pack of three.

DarrenSV650S 04-02-10 11:42 PM

Re: Delivery pipe for Scottoiler
 
Sweet. Cheers :)

Stu 05-02-10 12:08 AM

Re: Delivery pipe for Scottoiler
 
or a wd40 etc. straw

Stu 05-02-10 12:09 AM

Re: Delivery pipe for Scottoiler
 
Quote:

Originally Posted by DarrenSV650S (Post 2171761)
I must have had the delivery pipe pressed on to the disc too hard

You're oiling your brakes?

;)

DarrenSV650S 05-02-10 02:51 PM

Re: Delivery pipe for Scottoiler
 
What I meant was, the disc part of the sprocket. As opposed to the teeth. Yeh that's what I meant 8-[

larigos 07-02-10 08:12 AM

Re: Delivery pipe for Scottoiler
 
I used a length of brass tube from the local hobby shop. Didn't wear out!

Stu 07-02-10 04:18 PM

Re: Delivery pipe for Scottoiler
 
Quote:

Originally Posted by larigos (Post 2173648)
I used a length of brass tube from the local hobby shop. Didn't wear out!

They don't wear out. If it's touching the sprocket it might wear done a bit and it might wear down a bit then it would stop touching. If it's touching more than that you should se it up right.
If it's disappeared then it's got caught in the chain. I would rather have something softer than brass if that happens.


All times are GMT. The time now is 03:28 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.