New reg-rec, now blowing fuse.
 

Hello all!
I have a curvy; it has a new new reg/rec which plugs into a different two cables than the factory original reg/rec. It's installed, but now after about 30 seconds of use of the bike, every single time, a fuse (signals fuse, the only 15amp blue on the left column) blows.

Why is this?

Re: Heeeeelp!
 

boing

Re: Heeeeelp!
 

So to clarify, you got another reg/rec from a different bike and plugged it into whatever socket you could find rather than wire it into the correct ones :smt102

and now you wonder why it's causing a problem......

Re: Heeeeelp!
 

No, this was not from another bike, it was a SV650S K2 specific, brand-new reg/rec, as mentioned before. It came with instruction to plug the cables into a different pair of cables instead of the originals because "it is better this way"

This is what I got from Suzuki, this is what they told me to do. Do you know why the fuses might keep blowing?

Re: Heeeeelp!
 

Squirrel mentioned something about this before leaving ours earlier. I thought you'd sold that and just had the viffer now.

Fear not though Allan, the right peeps will see this in the morning and give you the help you need :-)

Re: Heeeeelp!
 

Saves me answering then.

Re: Heeeeelp!
 

I'm pretty sure you'll have the answer Mark ;-)

Never many people online this time of night to help with these things!

Re: Heeeeelp!
 

You need to turn the friendliness up a couple of notches rictus :)

Re: Heeeeelp!
 

why ?

Re: Heeeeelp!
 

To help out allan