Bar Risers for 57 plate 650s wanted
 

I'm looking for a set of bar risers for my 57 plate 650s. Anybody selling any or any advice as to the best place to get some? :confused: Any help would be greatly appreciated. Cheers. Tony. :D

Re: Bar Risers for 57 plate 650s wanted
 

what you looking for mate just the risers or a riser kit inc yoke n stuff?

Re: Bar Risers for 57 plate 650s wanted
 

You basically have a few alternatives:

HEL Bar Risers V. Expensive

I tried these, but weren't good enough for me

I eventually got one of the kits from here that sorted me aches and pains out:

http://www.streetfighterstore.co.uk/

Re: Bar Risers for 57 plate 650s wanted
 

gilles vario bars http://www.motorcycle-road-and-race....20_655_660.php

expensive but very very good, can adjust to you not the other way round. max rise 100mm. i found the 60mm rise gave enough to sit me up a bit more with a better angle and still use the original cables/wiring.

Re: Bar Risers for 57 plate 650s wanted
 

100mm still wasn't enough for me. Hence I did the conversion

Re: Bar Risers for 57 plate 650s wanted
 

yes but the ones you used were fixed. you can 'set' the vario bars in all directions up, down, back front and twist. but yes you will get a higher/wider rise out of a yoke conversion.

Re: Bar Risers for 57 plate 650s wanted
 

Correct. Banditmania ones were all wrong for me. I wasn't going to risk £300 down the pan so went for the full conversion.

Re: Bar Risers for 57 plate 650s wanted
 

Not sure mate, just looking for a bit of back relief. Do you have any for sale?

Re: Bar Risers for 57 plate 650s wanted
 

Some folks are just never satisfied ;)

Re: Bar Risers for 57 plate 650s wanted
 

This popped up in my daily EBAY search notification

http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT