SV650.org - SV650 & Gladius 650 Forum
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   SV650 K4 thrown rod - which other year engines fit? (http://forums.sv650.org/showthread.php?t=165571)

all the gear 25-04-11 03:15 PM
SV650 K4 thrown rod - which other year engines fit?
 
Hello all, firstly I’m new to the SV650, and would appreciate some advice .I have an SV k4 model with a thrown con rod low mileage 14k and full history .I would be interested to know if this is common and why?, engine number p507- 134195 it’s injection as you probably all know .I would like to know which engines are interchangeable with this bike. I have seen a low mileage v/strom one for sale but don’t really know if it will fit without any power loss/modification
ie is the power output from mapping or valves and cams? .Naturally if anyone has one let me know .thanks

markmoto 25-04-11 03:31 PM
Re: SV650 thrown rod
 
as far as i know any injected motor will fit so long as its not one of the later twin plug motors...

keith_d 25-04-11 03:45 PM
Re: SV650 thrown rod
 
In normal use the SV engine is pretty darn reliable.

The most likely reason for con-rod failure is oil starvation resulting in high rates of bearing wear. This can occur for several reasons:

a) Poor maintenance
b) Wheelies
c) Oil pump failure

There is a chance that someone might have over-revved the engine by changing down at high speed, but usually that's accompanied by wrecked plastics where it's chucked them off.

Hopefully one of the real experts will be along to comment on which engines will fit your frame/ecu.

Keith.

barwel1992 25-04-11 03:50 PM
Re: SV650 thrown rod
 
^ cant really over rev an sv as they have a limiter, i know iv hit mine loads lol

mine been fine even with an out of balance crank and i wont lie gets ragged to the moon and back

markmoto 25-04-11 05:09 PM
Re: SV650 thrown rod
 
Quote:
Originally Posted by barwel1992 (Post 2526070)
^ cant really over rev an sv as they have a limiter, i know iv hit mine loads lol

mine been fine even with an out of balance crank and i wont lie gets ragged to the moon and back
You can if you change down to many gears and let the clutch out with the road speed to high, the rev limiter only works when accelerating not when decelerating.

all the gear 25-04-11 06:55 PM
Re: SV650 thrown rod
 
thanks for your help ,I now know the one I had in mind won't fit so still looking

yorkie_chris 25-04-11 07:21 PM
Re: SV650 thrown rod
 
Some K3/4s were prone to throwing rods, dunno why.

andrewsmith 25-04-11 10:21 PM
Re: SV650 thrown rod
 
Quote:
Originally Posted by yorkie_chris (Post 2526143)
Some K3/4s were prone to throwing rods, dunno why.
wasn't the K3/4 that had a faulty batch of un rev limited ECU's?

yorkie_chris 25-04-11 10:23 PM
Re: SV650 K4 thrown rod - which other year engines fit?
 
Could well be, also the first of a new conrod design.

andrewsmith 25-04-11 10:26 PM
Re: SV650 K4 thrown rod - which other year engines fit?
 
Quote:
Originally Posted by yorkie_chris (Post 2526321)
Could well be, also the first of a new conrod design.
very true. Happens with most motors and bikes (things go wrong)


All times are GMT. The time now is 03:26 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.