SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   No clock illumination on 2000 curvy. (http://forums.sv650.org/showthread.php?t=176413)

SVmonkey 19-03-12 10:05 AM

No clock illumination on 2000 curvy.
 
I picked up my bike last night from my mates garage to take it home and only just noticed that i have no illumination in the clocks.

All dashboard indicator lights work, headlights, indys etc, just the clock illumination.

Could ALL the illumination bulbs have gone or is there a fuse in the fuse box that could explain this?

Cheers

Chris

SVmonkey 19-03-12 01:53 PM

Re: No clock illumination on 2000 curvy.
 
Wiring diagram online looks like a Grey wire could be the culprit in the main clock harness, will investigate tonight.
If that's ok then its the bulbs I reckon :(

SoulKiss 19-03-12 02:00 PM

Re: No clock illumination on 2000 curvy.
 
Quote:

Originally Posted by SVmonkey (Post 2680113)
or is there a fuse in the fuse box that could explain this?

Would be my guess

SVmonkey 19-03-12 03:15 PM

Re: No clock illumination on 2000 curvy.
 
Quote:

Originally Posted by SoulKiss (Post 2680251)
Would be my guess

I hope it is that simple

dazuk 19-03-12 04:11 PM

Re: No clock illumination on 2000 curvy.
 
if all the lights are working cant be a fuse probs a loose wire.

dazuk 19-03-12 04:20 PM

Re: No clock illumination on 2000 curvy.
 
looking at the wiring diagram it looks as you said the grey wire unless its the earth.
by the way chris fitted another left switchgear now got choke n pass working
thanks again for your help sunday
darrell

Glen650 19-03-12 07:35 PM

Re: No clock illumination on 2000 curvy.
 
had the same on my 2000 model and it was bulbs got ten bulbs from ebay they are T4 bulbs , only one bulb had blown so they must be on a curcuit of there own ony cost a couple o quid , you have to take the back of the clocks and take the curcuit board out to get at the bulbs which are a push in fit

Sid Squid 19-03-12 08:50 PM

Re: No clock illumination on 2000 curvy.
 
I wouldn't rule out bulbs - normally nothing gets done until the last of them has failed - Occam's razor.

If a fuse had popped some other stuff wouldn't work as well.

SVmonkey 19-03-12 10:31 PM

Re: No clock illumination on 2000 curvy.
 
Quote:

Originally Posted by dazuk
by the way chris fitted another left switchgear now got choke n pass working
thanks again for your help sunday
darrell

No problem mate, glad you got the choke and pass sorted.

Quote:

Originally Posted by Glen650
had the same on my 2000 model and it was bulbs got ten bulbs from ebay they are T4 bulbs , only one bulb had blown so they must be on a curcuit of there own ony cost a couple o quid , you have to take the back of the clocks and take the curcuit board out to get at the bulbs which are a push in fit

Quote:

Originally Posted by Sid Squid
I wouldn't rule out bulbs - normally nothing gets done until the last of them has failed - Occam's razor.

If a fuse had popped some other stuff wouldn't work as well.

Cheers guys, I've got a spare set of clocks, will plug them in and see if they light up and swap the bulbs over. Shame I couldn't leave them on if they light up but they would have the wrong mileage :roll:

SVmonkey 26-03-12 09:27 AM

Re: No clock illumination on 2000 curvy.
 
All three bulbs had blown, managed to replace one with a spare that I had in another set of clocks but need more

Are these the right bulbs I need?

http://www.ebay.co.uk/itm/10-x-Clear...item3cc01f89be

http://i.ebayimg.com/00/s/NDQwWDU0MA...7E%7E60_12.JPG


All times are GMT. The time now is 08:02 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.