![]() |
SV650SK3 Parts for sale (lots!!) **UPDATED!!**
I need to raise funds to fix my bike, so have been through the garage and have the following for sale.
Will work out postage for items individually when they sell but I don't take the mickey with postage costs! I'll get some pics as soon as poss but in the meantime if you want pics, please message me! All items taken from a 53 registered SV650SK3 which had done about 9500 miles when I was knocked off it by a cretin car driver in November 2004! What I didn't sell after I bought the wreck back has been sat in the garage since then! Main frame & swingarm - also has original shock absorber, side stand, side stand switch, aluminium paddock stand bobbins, rear wheel spindle (missing nut, though!), adjusters (missing the gauge big from one side though!). The frame is registered, I have the V5C and original number plate and it is SORN'ed (no MoT!!). It has not been written off according to HPI check Appears straight and there is little damage to the frame itself. BUT It is damaged. (See pics) The cross member that sits just behind the headstock (with the really rubbish welding on it!) has cracked the weld on one side, so may be repairable or may be just for spares or race use. - £120 http://img.photobucket.com/albums/v2...de8d7ce0ee.jpg http://img.photobucket.com/albums/v2...894064fc9d.jpg Pillion grab rail in grand candy blue. Looks straight & intact but has scratches all over it - may be able to be resprayed, though! Has the bolts and rubber fairing grommets included. - £5 http://img.photobucket.com/albums/v2...3712edd88b.jpg http://img.photobucket.com/albums/v2...item/image.jpg Standard (MoT!) exhaust can. Only used for first few hundred miles. Neat cut with decent amount of tail to attach to the header. Includes link pipe/sleeve but not goy any exhaust clamps. - £35 http://img.photobucket.com/albums/v2...743abff48d.jpg http://img.photobucket.com/albums/v2...97f7320128.jpg Radiator fan. Will check if working when I get the time! - £10 http://img.photobucket.com/albums/v2...2169fe1abe.jpg Whole rear brake setup (reservoir, master cylinder, caliper, hoses and even pads!) all still connected. Caliper could do with a strip down as been in storage for nearly a decade! - £25 http://img.photobucket.com/albums/v2...16ff5046ed.jpg Original horn. - £3 http://img.photobucket.com/albums/v2...em/image-2.jpg Right hand (throttle side) mirror. Scuffed mounting point and minor scratch to front of mirror casing but fully functional! - £7 possibly sold http://img.photobucket.com/albums/v2...6b8481357f.jpg http://img.photobucket.com/albums/v2...88409988eb.jpg Original little shock mud guard thingy! - £3 Radiator cap, mounting bracket & hose. - £5 possibly sold http://img.photobucket.com/albums/v2...cd58a6dd52.jpg Exhaust header stub - looking at pictures online, it would appear to be from the rear cylinder! - £5 http://img.photobucket.com/albums/v2...em/image-1.jpg Original screen. Light scuffs - will more than likely polish out with plastic polish/ toothpaste! - £10 SOLD! Throttle bodies. - £35 http://img.photobucket.com/albums/v2...44ee3f2c6d.jpg Expansion tank - cap and hoses still connected. - £10 http://img.photobucket.com/albums/v2...em/image-4.jpg Black infill panels (the ones from about where your knees sit) one has the front lug missing and the other has the front lug broken but repairable. Should fit fine with one lug and the bolt any way! No major scratches. - £25 the pair http://img.photobucket.com/albums/v2...e2fffa3a18.jpg http://img.photobucket.com/albums/v2...e2cf6b049c.jpg Pillion pegs. - £40 the pair http://img.photobucket.com/albums/v2...3aca03f04b.jpg Original loom with Meta alarm... Pretty sure it's all there! Not sure if I remember where the alarm fobs went though, so may not be much use... Can't find the alarm fobs anywhere but may be of use for parts? - £25 http://img.photobucket.com/albums/v2.../image-3-1.jpg Original regulator/ rectifier. Will see if I can test it before sale (any tips people!?). - £25 http://img.photobucket.com/albums/v2.../image-1-1.jpg Original air filter - only used for a couple of hundred miles before a K&N was fitted! - £5 http://img.photobucket.com/albums/v2...cccee4dd2b.jpg http://img.photobucket.com/albums/v2...77d0aeb4f9.jpg Original airbox snorkel. - £5 http://img.photobucket.com/albums/v2.../image-2-1.jpg RHS (brake side) footpeg/ rearset. Pedal bent and worn down but serviceable, heel guard tatty as I started to remove the paintwork as was naming on polishing them! - £20 http://img.photobucket.com/albums/v2...e75a3abdf3.jpg LHS (gear side) footpeg & rearset/ heelguard all intact - will need to make sure all the parts are there though! - £20 SOLD! HEL stainless braided rear brake line. - £10 SOLD! Original bar ends (2 pairs) and a pair of DHB bar ends - selling as a job lot as 1 pair badly scuffed with bent bolts and not got all internal grippy fitting/ nuts present - £5 SOLD! 1 x New Motrax micro arrow black & iridium mini indicator. - £2 http://img.photobucket.com/albums/v2...em/image-5.jpg NEW: Also found a set of body armour inserts. They look to be universal type that can do elbows or knees and shoulders or hips. - £5 http://img.photobucket.com/albums/v2...70c9bfe082.jpg |
Re: SV650SK3 Parts for sale (lots!!)
On the off chance, do you have the rear disc for sale at all?
|
Re: SV650SK3 Parts for sale (lots!!)
'Fraid not!
That went with the rear wheel a while back. |
Re: SV650SK3 Parts for sale (lots!!)
Ah that's a shame, ah well cheers anyway :)
|
Re: SV650SK3 Parts for sale (lots!!)
Dibs on the bar ends. Im without any at the minute. Can you send me pics please, especially of the original ones. Ta
|
Re: SV650SK3 Parts for sale (lots!!)
Will do...
Will have to dig them out from the bottom of the box! I'm working tonight til midnight and tomorrow 7am-7pm, so will be sometime from Monday onwards but no worries. The DHB ones are immaculate as fitted, looked at and not liked! The others are all reasonable but with minor scratching to the ends of some or all of them. |
Re: SV650SK3 Parts for sale (lots!!)
Can I take the lhs foot peg hangars
|
Re: SV650SK3 Parts for sale (lots!!)
M65 seeing how theres more than one set of bar ends howsabout a split after youve chose what you want?
|
Re: SV650SK3 Parts for sale (lots!!)
I'll have the hel rear brake line please, pm me with price inc p&p when you get chance buddy cheers!
|
Re: SV650SK3 Parts for sale (lots!!)
Quote:
Quote:
|
All times are GMT. The time now is 10:43 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.