could disc lock bend forks?
 

to add to my previous disc lock mishap

can you bend the forks?

only asking as it is leaking on same side now

was literally 2mph and barely moved but took speedo drive out

replaced that but on tuesday there was oil from the dust cover dripping down.

guessing the heat (hopefully) has just sped up an existing weak seal and is a coincidence.

have seals and oil ready to do

Re: could disc lock bend forks?
 

Dont change the seals before trying a seal mate...saves u a job!

Re: could disc lock bend forks?
 

is that the plastic strip you fish around with?

also likelyhood of bending forks with lock??

Re: could disc lock bend forks?
 

Yup to remove any grime making it unseal. I was skeptical but ive tried it on one minor leak and one big leak and it works. Hm, not sure. You rolled the bike off the stand then it hit the lock? Well, i doubt the lock or disc would have been bent much, so the fork probably took the brunt, but im no expect.

Re: could disc lock bend forks?
 

was 8 days later it leaked. not an sv, on side stand bike barely moved.

brake caliper would have took the force and thats fine.

didnt know how easy/hard forks bend and how much to cauae a leak

could disc lock bend forks?
 

I think hitting a pothole puts more force on the forks than a disc lock would just rolling it forward. For that reason, I doubt it is related.

Re: could disc lock bend forks?
 

Agree with Tomor. The shocks take a hell of a beating when you're hitting ruts at 100mph. Don't think a disc lock could possibly bend it at really low speed. Would it not have hit the brake calliper first anyway?

Edit: @Tomor - How much did hitting a bambi at 50 bend your forks?

Re: could disc lock bend forks?
 

yeah did just that fallout, hit calliper and broke speedo. speed was walking and went inches. no noises just no movement

hopefully coincidence but is leaking and pooling on same side.

could disc lock bend forks?
 

Not enough to write them off, motoliner straightened them.