![]() |
Torx bolts to remove ignition barrel?
I am replacing my clipons with a yoke conversion and need to get hold of the special torx like tool to undo my ignition barrel, does anyone know where i can get one or are they a suzuki only tool i have to get from them?
Thanks |
Re: Torx bolts to remove ignition barrel?
Is it a security torx like this?
http://www.google.co.uk/imgres?imgur...7Q-f6-Q5XyM%3A Cuz if so halfords sell em. I thought with some barrels you need to grind/cut off some rivets too iirc? |
Re: Torx bolts to remove ignition barrel?
Pretty common things. Think it's T40 if I remember right. You can get them on ebay
|
Re: Torx bolts to remove ignition barrel?
Thats what it looks like, i will try halfords first then
Cheers guys |
Re: Torx bolts to remove ignition barrel?
tiz a security 6 point T40. you need the hole in the middle.
|
Re: Torx bolts to remove ignition barrel?
If not screwfix do them
|
Re: Torx bolts to remove ignition barrel?
They will probably be a ******* to get out, as Mr Suzuki, he use a lot of thread lock on them
|
Re: Torx bolts to remove ignition barrel?
ooohhh and turn the yoke over on the forks so the bolt is facing you then before you try and take it off put a good and hot soldering iron on the bolt for a good 5 mins to soften the threadlock.
|
Re: Torx bolts to remove ignition barrel?
+1
|
Re: Torx bolts to remove ignition barrel?
Brilliant, thanks guys
|
All times are GMT. The time now is 09:42 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.