SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Bikes - Talk & Issues (http://forums.sv650.org/forumdisplay.php?f=129)
-   -   Swinging arm bearings- where from? (http://forums.sv650.org/showthread.php?t=215332)

Tommo1988 09-01-15 09:20 AM

Swinging arm bearings- where from?
 
Been told I need to replace mine. Where's best to purchase. Cheers.

Corny Gizmo 09-01-15 09:24 AM

Re: Swinging arm bearing advice please.
 
Bibio posted this the other day, they are for a pointy I believe and are currently half price

Click Me!

Tommo1988 09-01-15 09:24 AM

Re: Swinging arm bearing advice please.
 
Thanks very much

Tommo1988 09-01-15 09:26 AM

Re: Swinging arm bearing advice please.
 
Sorry are all the bit on that page compatible with the sv?

Corny Gizmo 09-01-15 09:28 AM

Re: Swinging arm bearing advice please.
 
It should only be showing one part number: 09263-25059 but they do a lot of other parts,

This is Bibio's Quote:
Quote:

also the Pointy 650 swingarm bearings are on less than half price (£14.90 each) offer at the moment. part code 09263-25059 so get them while you can.

Tommo1988 09-01-15 09:31 AM

Re: Swinging arm bearing advice please.
 
Spot on yea it does I just couldn't see stuff for sv just bandits

TamSV 09-01-15 09:37 AM

Re: Swinging arm bearing advice please.
 
What were the symptoms that led to the advice that replacement bearings are required?

In many pointy SV's there seems to be a bit of side to side play in the swingarm that won't necessarily be fixed by new bearings.

Have a read here - clicky

Tommo1988 09-01-15 10:26 AM

Re: Swinging arm bearing advice please.
 
Just read the huge thread the play is side to side on mine too. I just called ma Mech telling him about the shims he's still saying I should replace my bearing too as I'll have the arm off anyways.

TicklinJock 09-01-15 02:34 PM

Re: Swinging arm bearings- where from?
 
May be worth finding out which bearings are causing the play.
My MOT fail slip said "excessive swingarm" play... and found it was caused by the shock linkage knuckle bearings. This caused play in the vertical direction. Worst one on mine was the one that connects the knuckle to the frame. Bought a couple of sets from different suppliers as I found they had play in them from new. Fitted the ones that had the least play and a year later they got a mention in the next MOT... not for "excessive" that time though.

Bibio 09-01-15 03:39 PM

Re: Swinging arm bearings- where from?
 
there should be no up down movement on the swingarm but suzuki say that side to side is normal. i have a little up-down play due to not replacing the washers on the knuckle to frame which causes he inner bearing to move on the bolt.

if the MOT inspector has only felt side to side play then ask him/her to phone suzuki but i doubt you will get anywhere with this.


All times are GMT. The time now is 12:49 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.