SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   cutting out (http://forums.sv650.org/showthread.php?t=220528)

glyn 01-12-15 09:48 AM

cutting out
 
Bike 00curvy cutting out when I'm stopping at junctions.Idles andruns fine any other time anyone got any ideas of why.
Thanx in advance
Glyn

Cymraeg_Atodeg 01-12-15 10:44 AM

Re: cutting out
 
Specifically at junctions or is it when it is hot?

gibbzy2k1 01-12-15 11:21 AM

Re: cutting out
 
Is it wet? Mine was rather unwell yesterday in the rain and cut out on me when I stopped at a set of lights. It got worse in the evening by dropping to a single 325cc on the M4 several times.

I have grease the front plug and lead for now to get me through the week.

maviczap 01-12-15 08:15 PM

Re: cutting out
 
Quote:

Originally Posted by gibbzy2k1 (Post 3032202)
Is it wet? Mine was rather unwell yesterday in the rain and cut out on me when I stopped at a set of lights. It got worse in the evening by dropping to a single 325cc on the M4 several times.

I have grease the front plug and lead for now to get me through the week.

Get a fender extenda

Biker Biggles 01-12-15 08:32 PM

Re: cutting out
 
Clutch dragging?

glyn 02-12-15 05:41 AM

Re: cutting out
 
Got a fender extension yes it was wet don't think clutch is dragging but could bad vacuum tube cause this.Also noticed fair amount of oil coming from crankcase breather tubes any ideas.
Regards
Glyn

Geodude 02-12-15 08:42 AM

Re: cutting out
 
When mine was cutting out at junctions it was a dodgy clutch swich, so might be worth a check. Whats your warm idle rpm? mine is 1200

glyn 02-12-15 09:35 AM

Re: cutting out
 
My revs are set at 1500 clutch switch is bypassed to tell truth bike is a nightmare
Regards
Glyn

Heorot 05-12-15 02:21 PM

Re: cutting out
 
Is yours an injected bike, because on another thread it was said that the clutch switch affects the bikes efi settings causing it to run as if there was a choke in. I can't say it's true, only repeating an earlier thread.

Cymraeg_Atodeg 05-12-15 04:18 PM

Re: cutting out
 
If it is a curvy it is not injected, that came in on the K3 Pointy's


All times are GMT. The time now is 06:19 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.