mini indicators
 

my mini indicators flash fast? the bike passed an mot last week so it cant be that bad i'd just like to slow them down alittle, any ideas? i dont know if there normal bulbs or led's?
http://i86.photobucket.com/albums/k1...-zzr/indys.jpg

you need a relay resister thingy

Led Flasher Relay.
Details

If you've customised your bike with LED indicator lamps then the chances are they flash too fast to pass the MOT. Simply fit this wide range flasher relay and guarantee the correct flash rate whatever indicators are fitted.





http://upload4.postimage.org/1726896...asher_unit.jpg
SEE HERE


http://www.busters-accessories.co.uk...sp?id=451&pg=2

thourght that was only led's tho? i dont think mine are led but couldnt be sure.

u jsut need a resistor on each indicator not sure what ohm it is should think itl go on the positve you could jsut buy a bunch and find out which one works better i wouldnt bother with the indicator its like £30 for a resistor that costs Pence.... some one much know the corect one

They look like motrax tinycators they use a 12v 6w bulb they're not LED

any idea why they would be flashing fast?

I think it may be cos the bulbs are only 6w whereas i think most indies are 10 or 21w so if i'm right that would mean there is not as much load on the indies so it's like having a bulb out

Kwak, those are the Eagle eye range are they not?! Very nice I must say, but too pricey for my thin wallet! They run 12v bulbs iirc, but they flash fast due to resistance/current changes from stock part caused by lower power output on these bulbs.

I fitted a resistor of 25w and 10 ohms resistance on mine. These are the metal bodied 'power resistor' range, not the cheaper ceramic/plasticky type! Bought from RS. Maplins do sell them, but I think they only go up to 15w or something if memory serves me correctly.

Please read this thread, as it explains things better than me!

http://forums.sv650.org/viewtopic.ph...ghlight=sparky

Good luck buddy

is it all worth the hassle? :roll: