SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Misting under Rev Counter glass 2005 type (http://forums.sv650.org/showthread.php?t=94636)

Tomis 06-08-07 10:53 PM

Misting under Rev Counter glass 2005 type
 
Just got second hand SV650 Naked 2005 model with 10,000 miles on the clock, the glass/plastic cover over the rev counter and LCD display
has misting on the underside. can someone please advise on taking
the clock covers apart so that I can clean the underside of
the glass.
thanks,
Tomis

padmane 07-08-07 01:32 PM

Re: Misting under Rev Counter glass 2005 type
 
Use this as a guide

http://www.chewys-stuff.co.uk/instruments/LEDs.doc

Cheers :)

kwak zzr 07-08-07 01:55 PM

Re: Misting under Rev Counter glass 2005 type
 
quite simple to take apart, take clock off, undo from rear, clock comes apart (front, rear, and internals) remove the circit board and lcd panel and wipe the inside of the perspex window. if i remember rightly there is a foam type gasket in between where the case fits together, check this is intact because the moisture is getting if from somewhere.

RhythmJunkie 07-08-07 03:59 PM

Re: Misting under Rev Counter glass 2005 type
 
I have the same problem with the headlight lenses on the Stilo, always fogging up with condensation! Purge the clock with nitrogen then seal it with a sealant to keep the nitrogen in and the damp out!
Don't know if thats possible but worth a thought!

kwak zzr 07-08-07 10:00 PM

Re: Misting under Rev Counter glass 2005 type
 
bit extreme? would be a one off tho :)

Tomis 07-08-07 10:03 PM

Re: Misting under Rev Counter glass 2005 type
 
Thanks for all the info, I was hoping it was a simple job,
but it's an expensive bit of kit to mess up.
Thanks again,
Tomis

kwak zzr 07-08-07 10:17 PM

Re: Misting under Rev Counter glass 2005 type
 
tomis it is easy, just take off, unplug, open case, wipe out, put back together.

Tomis 07-08-07 10:30 PM

Re: Misting under Rev Counter glass 2005 type
 
What I meant to say was that i'm glad it's an easy
job to do, I just wanted a little advice before starting
in case it was one of those jobs best left to the experts.
Tomis

RhythmJunkie 08-08-07 12:10 PM

Re: Misting under Rev Counter glass 2005 type
 
Quote:

Originally Posted by kwak zzr (Post 1256176)
tomis it is easy, just take off, unplug, open case, wipe out, put back together.

...erm and don't short out the circuit board with your high voltage body parts!!! ;)

Captain Nemo 08-08-07 03:46 PM

Re: Misting under Rev Counter glass 2005 type
 
if you need some nitrogen ive got some here on my desk doing nothing.....................lol;) ;) ;)


All times are GMT. The time now is 03:31 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.