Universal rear paddock stand

As the title, that will fit an SVS K3 as well as most other bikes.

Whats a good one? Do the £20 ones have any massive down falls over £40/£60 ones?

Do ABBA stands do a universal one? can you put a bike on it alone? (I know its not a rear stand)

Cheers

http://cgi.ebay.co.uk/NEW-HEAVY-DUTY...QQcmdZViewItem

seems like a good deal??

Ive got a rear one with the cups. cost about 25 GBP. I've not had any problems with it.

Hiya, I just went into J&S in birmingham and they have some univeral cup ones for 24.95 ,Does the job great and helped me no end yesterday when I had to get the wheel off , have a new valve fitted and then replace the wheel....easy to put together too...the stand I mean,, not the wheel.

[STRAMASHER]

Get bobbins for the swingarm and get the right type of stand. I bought the cheap 2 for £50 and they are fine for most bikes. A lot less hassle than the cups, especially if you get a bike that has a low slung torque arm and no place for bobbins (nightmare )

I also have a beefy Micron cup job that has served me well for years and is sturdy for any heavy bikes. The cheapys you can see bending.

I got my paddock stands FOR FREE at the Birmingham Motorcycle Show.
Bought Tuzo leathers for £129, only to discover that I am also
getting the stands.

Here is the rear one (don't know what make it is):

I use the rear paddock stand regularly. As to the front one I
decided not to tempt fate and never use it.

'cup' front and rear paddock stands are the hardest to use!!

I advocate 'bobbin' rear stands and 'bottom yoke' front stands ... anything else to my mind is a waste of money (except ABBA pro etc).