Lost Renntec Instructions

Sorry really simple question was wondering if someone could answer for me, i lost my insructions for my Renntec, when i'm fitting which side do i put the washers on....

Before the screw on top, or out of site underneath after the screw, cheers Matt.

on top

Cheers boss now i can fit it for me peaks weekend.

Hmmm tried it your way and the screw won't even screw in, tried it with them at the bottom and it seems to fit much better?

OK still not working properly, could anyone with the Renntec rack post me the write the insructions up on here, theres only about three steps i can't get it too hold up

If it's a pointy I think you have to take some spacers out of the existing holes. The rack iirc has the spacers fitted and will just drop in after you take out the originals.

Yeh i took the spacers out, but i'm 99% sure i still use the little thin washers from the original Grab Rail or do i just screw it in with nothing atall?

Can anyone just post the 3-4 simple steps stated in the manual, someone must have a renntec, really need to know as i go peaks on thursday.

well with mine i just use the rack and bolts - no washers as far as i remember.
not saying thats correct but works for me.

Originally Posted by mattb200

well with mine i just use the rack and bolts - no washers as far as i remember.
not saying thats correct but works for me.

Ah right maybe it was the original bolts not the original washers from the grab rail :P, cheers that might help alot!