Will Bandit 1200 bar clamp and riser fit SV650 naked yoke? - SV650.org

Gremlin · 14-09-11, 06:41 AM

I'm going to put a naked top yoke on my curvy sv650s and need to know if a 1998 bandit 1200 clamp and risers are same size. They seem to be the same I've seen in Hayes manual. I asked the seller but they don't know. Maybe I've bitten off more than I can chew with this project but I'm going to have a go!

14-09-11, 07:15 AM

Bandits and SVs both use 22mm diameter bars, but couldn't tell you if the Bandit risers will fit in the holes in the SV yoke

Jayneflakes · 14-09-11, 09:25 AM

try this

E-Bay top yoke sale.

Just in case that don't work, here is the full link.

http://www.ebay.co.uk/itm/Suzuki-Sv-...ht_2937wt_1139

Sid Squid · 14-09-11, 01:48 PM

They're not the same parts - the Bandit has rubber mounted handlebar clamps that mount to the top yoke in a different manner, the holes in the SV yoke aren't big enough to accommodate the mountings from the Bandit, but, and it is a but, the Bandit's mounts have the same, (I think), size bolt as the SV does. This may mean the Bandit mounts could be fitted in place on the SV yoke, but they may be too short without the rubber parts and spacers, (that won't fit in the SV yoke), meaning the handlebar won't clear the steering stem nut.

You'll have to try to be certain - but I doubt it will fit.

Gremlin · 14-09-11, 04:42 PM

Thanks. I'll keep looking on eBay, might get lucky.

14-09-11, 06:41 AM	#1
Gremlin Member Join Date: Feb 2010 Location: Bedfordshire Posts: 37	Will Bandit 1200 bar clamp and riser fit SV650 naked yoke? I'm going to put a naked top yoke on my curvy sv650s and need to know if a 1998 bandit 1200 clamp and risers are same size. They seem to be the same I've seen in Hayes manual. I asked the seller but they don't know. Maybe I've bitten off more than I can chew with this project but I'm going to have a go!

14-09-11, 07:15 AM	#2
Lozzo Guest Posts: n/a	Re: Will Bandit 1200 bar clamp and riser fit SV650 naked yoke? Bandits and SVs both use 22mm diameter bars, but couldn't tell you if the Bandit risers will fit in the holes in the SV yoke

14-09-11, 01:48 PM	#4
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Re: Will Bandit 1200 bar clamp and riser fit SV650 naked yoke? They're not the same parts - the Bandit has rubber mounted handlebar clamps that mount to the top yoke in a different manner, the holes in the SV yoke aren't big enough to accommodate the mountings from the Bandit, but, and it is a but, the Bandit's mounts have the same, (I think), size bolt as the SV does. This may mean the Bandit mounts could be fitted in place on the SV yoke, but they may be too short without the rubber parts and spacers, (that won't fit in the SV yoke), meaning the handlebar won't clear the steering stem nut. You'll have to try to be certain - but I doubt it will fit. __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"

14-09-11, 04:42 PM	#5
Gremlin Member Join Date: Feb 2010 Location: Bedfordshire Posts: 37	Re: Will Bandit 1200 bar clamp and riser fit SV650 naked yoke? Thanks. I'll keep looking on eBay, might get lucky.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wanted sv650 naked top yoke	devil1	Stuff Wanted	3	15-09-10 01:10 PM
SV650 Naked Master cylinder clamp	Jay-ninja	SV Talk, Tuning & Tweaking	5	19-07-09 08:36 AM
Bandit 1200 rear wheel for sv650	Kulay	SV Talk, Tuning & Tweaking	13	14-01-08 08:45 PM
Bandit 1200	rob13	Bikes - Talk & Issues	0	28-03-07 10:37 PM
SV650 K6 Naked, bar riser max size without cable changes?	gomez	SV Talk, Tuning & Tweaking	0	19-06-06 09:13 PM