K5 Rear Axle Replacement with K3 part? - SV650.org

08-01-12, 10:07 PM

Quick Question: Does a K3 axle fit a K5? I've read about and can't find anything to suggest it doesn't but help from an experienced org member would be nice

Long Back Story: (for those who wonder why)

Time for a chain adjustment and my crash damage is coming back to haunt me yet again

The bike went down on it's left and one of the things that scraped the floor was the axle and bolt for the rear tyre

Here's a some link to the state of it:
https://plus.google.com/u/0/11716635...ts/X5YvVKXFe9U

Anyways, damaged thread, and it's probably gonna be a case of it comes off, but will be a pain to get back on (if it goes back on at all). To be on the safe side I need a new axle and ImplodedHamster looks to be selling one.

Sid Squid · 08-01-12, 11:19 PM

The axle is the same, that said yours will probably clean up with a thread file and some quality time. Probably worth repalcing the nut witha good/new one though.

08-01-12, 11:40 PM

Cheers Sid!

Probably not the best photos, since none of them fully show that at one point the thread is buggered all the way back to the nut. But I'll see if I can make it work. If not it's good to know a K3 axle would work and I'm sure ImplodedHamster will be glad to ditch another part.

Yeah she's gonna be getting a new nut and a good clean down and oil up after I've got my exams out the way this week.

08-01-12, 10:07 PM	#1
Spoonie Guest Posts: n/a	K5 Rear Axle Replacement with K3 part? Quick Question: Does a K3 axle fit a K5? I've read about and can't find anything to suggest it doesn't but help from an experienced org member would be nice Long Back Story: (for those who wonder why) Time for a chain adjustment and my crash damage is coming back to haunt me yet again The bike went down on it's left and one of the things that scraped the floor was the axle and bolt for the rear tyre Here's a some link to the state of it: https://plus.google.com/u/0/11716635...ts/X5YvVKXFe9U Anyways, damaged thread, and it's probably gonna be a case of it comes off, but will be a pain to get back on (if it goes back on at all). To be on the safe side I need a new axle and ImplodedHamster looks to be selling one.

08-01-12, 11:19 PM	#2
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Re: K5 Rear Axle Replacement with K3 part? The axle is the same, that said yours will probably clean up with a thread file and some quality time. Probably worth repalcing the nut witha good/new one though. __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"

08-01-12, 11:40 PM	#3
Spoonie Guest Posts: n/a	Re: K5 Rear Axle Replacement with K3 part? Cheers Sid! Probably not the best photos, since none of them fully show that at one point the thread is buggered all the way back to the nut. But I'll see if I can make it work. If not it's good to know a K3 axle would work and I'm sure ImplodedHamster will be glad to ditch another part. Yeah she's gonna be getting a new nut and a good clean down and oil up after I've got my exams out the way this week.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear axle nut size - K5?	Spiderman	SV Talk, Tuning & Tweaking	13	18-05-11 11:57 AM
part exchange and replacement question	steveg	SV Talk, Tuning & Tweaking	1	23-10-10 08:15 AM
Rear Axle Nut	TheOnlyNemesis	SV Talk, Tuning & Tweaking	9	19-01-10 08:26 PM
GSXR 750 k4 front wheel axle part.	Caddy2000	Idle Banter	4	22-12-08 10:56 AM
replacement part for the speedo sensor on the front axle?	GooseSVSK2	SV Talk, Tuning & Tweaking	3	14-03-05 08:12 PM