Curvy lower Fairing Fixing kit wanted

Hi To All and Happy new Year! was wondering if any of you might have the lower fairing fixing kit for a curvy knocking about? i have got the bar that goes under the radiator that joins the 2 fairings, but none of the rest. also wondering if anybody has made any? and if so please advise me on doing so? many thanks, Lauren

[maviczap]

Brand new ones here £47

http://www.robinsonsfoundry.co.uk/bu...73-430-010.htm

[Geodude]

Beaten to it, you're quick on the keyboard today mav

Originally Posted by maviczap

Brand new ones here £47

http://www.robinsonsfoundry.co.uk/bu...73-430-010.htm

Ouch! I ought one from them in June and it was less than 20 quid delivered for a new OEM kit.

Trouble is they seem to be the only people who have them so I guess they can charge what they like, but double the price in 6 months is a bit steep. Worth a call to see if you can knock them down a bit?

Hi Thanks Guys thing is i got the top rad bracket fitted, which already cost enough and the other brackets that i can work out belong at the bottom back end of the fairing to stop it touching the exhaust, and around the middle, there is a bolt set further back which is a smaller engine mount bolt which obviously does not come out far enough to mount the fairing, but there is a hole there that must need a spacer? would like to try and make them. has anybody got any measurements or done this before. cheers then

Originally Posted by suzuki_lady7

Hi Thanks Guys thing is i got the top rad bracket fitted, which already cost enough and the other brackets that i can work out belong at the bottom back end of the fairing to stop it touching the exhaust, and around the middle, there is a bolt set further back which is a smaller engine mount bolt which obviously does not come out far enough to mount the fairing, but there is a hole there that must need a spacer? would like to try and make them. has anybody got any measurements or done this before. cheers then

Take some pics of the bits you are struggling with and post them and I'll take the corresponding ones on mine and post those - loads easier than trying to explain.

If you go on this site they are the OEM firm that made the 99-02 fairings. Somewhere on there is a PDF you can download with lots of helpful pics

http://www.tcpsa.com/

Hi Thanks for your help. This is the exact same fairing, it is the middle and lower mounts (pics attatched) that i need. if there is any chance you could measure the length of these brackets that would be a great help, i need to know how far they come out from the engine/frame. Thanks very much

The value of keeping everything....

I thought I'd thrown out the old kit but here it is. It's in crap condition but the brackets are probably just about salvageable. I had to cut the the long bracket that goes by the Rad to get it off.

Anyone you can have them if you want. I don't want a payment just cover the postage which shouldn't be more than a fiver.

PM me if you want it

[maviczap]

That's a result

What a result! And what a nice fella. Thanks very much