f 1 error code?

does anyone no wot the f1 error code means just started to flash up after i refitted the tank help please

[Bibio]

yup. i means that you have forgot to plug something back in.

It's FI for 'Fuel Injection'

Does the bike start?

no wont start and the fuel pumps stopped kicking in

search for the term "dealer mode" and then "fault codes" this will tell you whats up

Originally Posted by maz

no wont start and the fuel pumps stopped kicking in

Since you've had the tank off, you might have dislodged the tilt switch. It a little black box with a block connector of wires, that is supposed to sit in a rubber holder on the front of your battery box behind your tank, under the riders seat. If this isn't in the right position, or is hanging loose, the bike will think it's lying on it's side, will give an FI error, and won't start.

If it's not this do what was posted above about putting the bike into dealer mode. If you use the search function on this forum you'll get loads of threads that tell you how to do it and then tell us what your error code is.

that maywell be it as the hole of the rear harness is lying on the floor

Originally Posted by maz

that maywell be it as the hole of the rear harness is lying on the floor

This is kind of critical info when you're looking for a diagnosis mate

Haha


Member of the 1 litre club...

thanks all, none of the above battery buggerd put the one on off the zx6 and it barked to live