Curvy Parts - SV650.org

andrewsmith · 29-04-13, 06:45 PM

Time to clear some space in the Shed, from the winter of tinkering and evil!
There will be some more parts in the next week or so as I get through the shed.

I do have the odd GSXR 600 K1 bit knocking round and a couple of bits that can be used on other bikes, I'll list them up later

First up...
Curvy Lower Yoke: £30 posted.
This one is off my bike, it was swapped with another one which was cleaned and sprayed up the same. Its been degreased and the spot rust taken off, then sprayed with 2 coats of Silver Plasticote Fast Dry enamel.

Curvy brake torque arm £10 posted
Its a bit tatty, given a p*** poor coat of silver paint. Its all solid under the paint. Its a poor standard for me refurbishing parts hence price.

Rear Caliper Hanger £10 posted
This is in a good clean condition, sprayed up the same time as the lower Yoke. Mine again is done the same way and this lasted 2 years out in most weathers and it lives under cover in the outdoors

Lastly for this pile
Front pads £12.50 posted

Well I seem to amass these types of things over a few months and they need to go! No brand, but look like Sintered/ HH (if you work in EBC spec) and good for about 7k (if not more)

Thanks
Andy

andrewsmith · 08-05-13, 10:45 AM

Top floor stop with a bump

andrewsmith · 18-05-13, 07:20 PM

Bump

29-04-13, 06:45 PM	#1
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Curvy Parts Time to clear some space in the Shed, from the winter of tinkering and evil! There will be some more parts in the next week or so as I get through the shed. I do have the odd GSXR 600 K1 bit knocking round and a couple of bits that can be used on other bikes, I'll list them up later First up... Curvy Lower Yoke: £30 posted. This one is off my bike, it was swapped with another one which was cleaned and sprayed up the same. Its been degreased and the spot rust taken off, then sprayed with 2 coats of Silver Plasticote Fast Dry enamel. Curvy brake torque arm £10 posted Its a bit tatty, given a p*** poor coat of silver paint. Its all solid under the paint. Its a poor standard for me refurbishing parts hence price. Rear Caliper Hanger £10 posted This is in a good clean condition, sprayed up the same time as the lower Yoke. Mine again is done the same way and this lasted 2 years out in most weathers and it lives under cover in the outdoors Lastly for this pile Front pads £12.50 posted Well I seem to amass these types of things over a few months and they need to go! No brand, but look like Sintered/ HH (if you work in EBC spec) and good for about 7k (if not more) Thanks Andy __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi

08-05-13, 10:45 AM	#2
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Re: Curvy Parts Top floor stop with a bump __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi

18-05-13, 07:20 PM	#3
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Re: Curvy Parts Bump __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Curvy Parts	AZZ3R	For Sale - SV's and SV related items	4	09-03-12 12:15 PM
curvy parts	martin15s	For Sale - SV's and SV related items	1	13-06-11 12:51 PM
Need curvy parts	gaal_alexandru	Stuff Wanted	1	26-04-09 04:30 PM
Where to get these curvy parts?	TheStudent	SV Talk, Tuning & Tweaking	13	22-01-09 09:30 AM
CURVY PARTS	21QUEST	For Sale - SV's and SV related items	0	15-07-06 11:51 PM