SV1000K3 oil capacity?

Hi just replaced oil and filter (kandn)on sv1000n k3 with new filter apparently it's around 2.9 litres of oil I've used silkoline 10w40,now I used a level on my bikes seat to ensure bike was level whilst filling I drained it for around 2 hours tilting the bike etc to ensure all ****es out,however when I filled the oil back up again I used prob around 3.3 litres of oil until my oil level showed full,my concern is that if my oils supposed to be 2.7-2.9 litres with filter why didnt it show full on my level gauge I started the bike too to ensure all oil reached critical areas and when cold oil still show in level area.do I go with capacities or the level sight glass thanks

[Mark_h]

K3N takes 2.7l It should be stamped on the engine casing next to the sight glass.

Did mine today, filled to F on sight glass, then started the bike and it dropped a little while it filled the filter etc. Then checked after it had stood for 10 mins, topped back up to F and took it for a quick ride and it didn't move.

It takes different volumes depending on whether you've replaced the filter, and will take even more if you've actually rebuilt the engine.

I've always gone by sight glass on mine. You fill to the F, NOT to the top of the sight glass.

Yeah cheers I filled to the F line on sight glass don't want compression issues lol,haven't rebuilt my engine bikes now got 6k on clock done 400miles since oil change,will always fill to where the F line is on glass now just needed clarification thanks

[DJ123]

Did you fill to the F when the bike was upright?

Yes I propped up the side stand and put a level on the seat to ensure it was sat dead centre,so I let my bike cool to around 37 degrees and oil sat at f mark while level just checking to see if that's ok lol

[Tomor]

Originally Posted by chris87

Yes I propped up the side stand and put a level on the seat to ensure it was sat dead centre,

Flippin 'eck, that a bit accurate isnt it?!!?!

Haha lol I like to make sure things are done right ,this being my first bike n all just spent heaps on new oil,filter kandn new rear end parts etc going to prob get Beowulf exhausts then change rear hugger as its scabby disc n pad change to that wavy ones galfers I think coolant change and brake oil change,heaps more to do before I'm happy with it