 |
 |
| SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
 |
|
|
Thread Tools |
04-03-14, 12:16 PM
|
#1 |
|
Guest
Posts: n/a
|
Curvy & Pointy steering stems same?
are the above the same as i have a usd front end in my curvy and want to fit it to the pointy will they swap over without swapping the stems over
|
|
|
04-03-14, 12:48 PM
|
#2 |
|
Member
Mega Poster
Join Date: Jul 2003
Location: South London
Posts: 9,799
|
Re: yoke stems/steering stem
as standard they are both a 30 x 55 x17 bearing and share the same part number 09267-30010, but I'm sure you already knew that
__________________
Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride! |
|
|
|
04-03-14, 01:03 PM
|
#3 |
|
Member
Mega Poster
Join Date: Feb 2010
Location: Troon, Ayrshire
Posts: 1,812
|
Re: yoke stems/steering stem
Depends what USD front end you've got and what was done to fit it on the curvy.
If it's the common GSXR swap with the curvy top head bearing replaced, then it should work OK on the pointy. If the curvy stem was pressed into the yoke (retaining both standard curvy head bearings) then that won't work with the pointy top bearing. |
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Washer for Steering stem nut. | admin | SV Talk, Tuning & Tweaking | 4 | 21-02-12 01:49 PM |
| Steering stem top nut size? | MisterTommyH | SV Talk, Tuning & Tweaking | 17 | 18-07-11 09:18 PM |
| Steering stem | cammy | SV Talk, Tuning & Tweaking | 3 | 30-04-09 06:26 PM |
| Steering stem removal | Torn-Thorax | SV Talk, Tuning & Tweaking | 17 | 20-09-07 10:12 AM |
| Steering Head Stem Nut | scooby2102 | SV Talk, Tuning & Tweaking | 0 | 06-12-06 01:41 PM |
