Dynojet 170's - SV650.org

09-02-05, 01:42 PM

Where is the best place I can get these from, for service and price? Also never done this so I will have a go and stick a picture guide on me web page when I have done it.
sexysi

09-02-05, 01:47 PM

I've heard pdq are the place to go.

09-02-05, 01:54 PM

£82.50 is this a good price for a Dynojet kit.
sexysi

northwind · 09-02-05, 01:56 PM

I got mine for £20

But it sounds about right for one that's still got all the jets in...

PDQ gave me brilliant service for buying jets, arrived next day by first class post, and I didn't even think that was possible! Price, for jets, isn't likely to matter all that much, they cost a couple of quid so it's worth gpoing for good service instead of shopping around to save 10p.

09-02-05, 02:00 PM

See I've already got the BMC filter, so I just need to get the jets, would there be anything else i require apart from the jets?
sexysi

northwind · 09-02-05, 02:04 PM

Heh, I like that your sig now has "BMC filter and rejetted" while you're still shopping for the bits

You did get the Race RS, didn't you, and not the Race? If so, all you need is the it and the big-ass jets. Well, all you need is the jets but to do it well you need the kit. I'd probably get 165s and maybe 160s as well were I you with the slip-on...

09-02-05, 02:09 PM

Cheers dude.

Oh yep I am still shopping, I havn't even seen the new powder coated wheels and the calipers yet, they are being done this week, I will pick the stuff up on Saturday when I fly back to the uk. Just saves me doing the Signature then, I am in a bloody hard Cisco Content switch course, which is way over my head at the moment, so I have time to go on the forum.
sexysi

09-02-05, 02:46 PM

Give Big CC Racing a call about a dynojet kit - I paid about £65 for mine if I remember rightly...

http://www.bigccracing.co.uk/

0118 977 6755.

First class work

northwind · 09-02-05, 03:23 PM

that's just the Stage 1 kit they're advertising... Going by the directions in the Stage 1&3 kit, which I got, it won't include the stiffer springs or the #54 drill bit to drill the slides, just jets and needles? (Dynojet recommend you only use those parts with pod filters and no airbox, but since they recommend you use 144s (IIRC) with a full system and race filter, I'm fully prepared to ignore them and just use their bits.)

The DJ kit's actually really badly specced... Their recommended jets are kind of wee, and it includes 138s but nothing between 146 and 180! My bike wouldn't run on anything under a 155, with nothing too out of the ordinary in it...

09-02-05, 04:10 PM

I know that Mike1234 was selling some carbs with 170's... for about 120..

http://forums.sv650.org/viewtopic.php?t=16630

But there sold.. though I think he might be able to get some more.. though he does have them with:
Carburettors
Supplied with 137.5 and 142.5 Mikuni jets
£60

09-02-05, 01:42 PM	#1
sexysi Guest Posts: n/a	Dynojet 170's Where is the best place I can get these from, for service and price? Also never done this so I will have a go and stick a picture guide on me web page when I have done it. sexysi

09-02-05, 01:56 PM	#4
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	I got mine for £20 But it sounds about right for one that's still got all the jets in... PDQ gave me brilliant service for buying jets, arrived next day by first class post, and I didn't even think that was possible! Price, for jets, isn't likely to matter all that much, they cost a couple of quid so it's worth gpoing for good service instead of shopping around to save 10p. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

09-02-05, 02:04 PM	#6
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Heh, I like that your sig now has "BMC filter and rejetted" while you're still shopping for the bits You did get the Race RS, didn't you, and not the Race? If so, all you need is the it and the big-ass jets. Well, all you need is the jets but to do it well you need the kit. I'd probably get 165s and maybe 160s as well were I you with the slip-on... __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

09-02-05, 02:46 PM	#8
steve mac Guest Posts: n/a	Get the dynojet kit from Big CC Racing... Give Big CC Racing a call about a dynojet kit - I paid about £65 for mine if I remember rightly... http://www.bigccracing.co.uk/ 0118 977 6755. First class work

09-02-05, 03:23 PM	#9
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	that's just the Stage 1 kit they're advertising... Going by the directions in the Stage 1&3 kit, which I got, it won't include the stiffer springs or the #54 drill bit to drill the slides, just jets and needles? (Dynojet recommend you only use those parts with pod filters and no airbox, but since they recommend you use 144s (IIRC) with a full system and race filter, I'm fully prepared to ignore them and just use their bits.) The DJ kit's actually really badly specced... Their recommended jets are kind of wee, and it includes 138s but nothing between 146 and 180! My bike wouldn't run on anything under a 155, with nothing too out of the ordinary in it... __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

09-02-05, 01:47 PM	#2
Carsick Guest Posts: n/a	I've heard pdq are the place to go.

09-02-05, 01:54 PM	#3
sexysi Guest Posts: n/a	£82.50 is this a good price for a Dynojet kit. sexysi

09-02-05, 02:00 PM	#5
sexysi Guest Posts: n/a	See I've already got the BMC filter, so I just need to get the jets, would there be anything else i require apart from the jets? sexysi

09-02-05, 02:09 PM	#7
sexysi Guest Posts: n/a	Cheers dude. Oh yep I am still shopping, I havn't even seen the new powder coated wheels and the calipers yet, they are being done this week, I will pick the stuff up on Saturday when I fly back to the uk. Just saves me doing the Signature then, I am in a bloody hard Cisco Content switch course, which is way over my head at the moment, so I have time to go on the forum. sexysi

09-02-05, 04:10 PM	#10
Grinch Guest Posts: n/a	I know that Mike1234 was selling some carbs with 170's... for about 120.. http://forums.sv650.org/viewtopic.php?t=16630 But there sold.. though I think he might be able to get some more.. though he does have them with: Carburettors Supplied with 137.5 and 142.5 Mikuni jets £60

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
dynojet kit?	bungfruit	SV Talk, Tuning & Tweaking	10	13-08-08 04:35 PM
Dynojet Kit question	zz-rrrr	SV Talk, Tuning & Tweaking	5	27-05-07 09:23 PM
dynojet - easy to fit?	01 sv650s	SV Talk, Tuning & Tweaking	21	20-10-06 08:23 PM
Dynojet Kit	stev	SV Ecosse	10	12-04-06 08:25 PM
Dynojet Kit	gman	SV Talk, Tuning & Tweaking	7	15-05-05 01:35 PM