Removing the barrell ? - SV650.org

11-01-06, 11:40 AM

hi all anyone ever taken the ignition out of a curvy 2000.... need to get it out so i can show a lock smith.

is it hard to do or should i get some one else to do it. ????

TSM · 11-01-06, 11:45 AM

AFAIK There are two torx bolts on the underside of the ignition, i cant remember if they are security torx with the pin in the middle.

northwind · 11-01-06, 08:15 PM

Yup. Red threadlocked too to make it even more of a bugger. It was with great pleasure I threw the "security" bolts in the bin- you can buy the bits for £2.99 in Machine Mart, how very secure

11-01-06, 11:40 AM	#1
stewboy Guest Posts: n/a	Removing the barrell ? hi all anyone ever taken the ignition out of a curvy 2000.... need to get it out so i can show a lock smith. is it hard to do or should i get some one else to do it. ????

11-01-06, 11:45 AM	#2
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	AFAIK There are two torx bolts on the underside of the ignition, i cant remember if they are security torx with the pin in the middle. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

11-01-06, 08:15 PM	#3
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Yup. Red threadlocked too to make it even more of a bugger. It was with great pleasure I threw the "security" bolts in the bin- you can buy the bits for £2.99 in Machine Mart, how very secure __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Removing R&Gs to fit fairing.	Miles	SV Talk, Tuning & Tweaking	9	10-06-08 06:37 PM
Removing Decals?	SAMMY650	SV Talk, Tuning & Tweaking	6	21-09-07 11:45 AM
removing decals	r4ce_e3nd	SV Talk, Tuning & Tweaking	16	23-10-06 05:08 PM
Removing an immobiliser?	northwind	SV Talk, Tuning & Tweaking	3	15-10-06 01:32 AM
Removing the tool box	pingu	SV Talk, Tuning & Tweaking	10	01-06-06 09:42 AM