replacing old R+G bung with new motosliders?

pretty much i need to take these old R+G bungs off........

http://s62.photobucket.com/albums/h1...8122008234.jpg

and put my new motorsliders on, however i understand how to fit the new ones but the top bolt where the bracket for the R+G bungs sits, will i need a standard bolt to go back on there or will that one still work???pretty sure its too long??

cheers

Correct, you will need to replace both the left and right rear cylinder mounting bolts.

Part Numbers; 01550-10557 and 01550-10807.

You can order from Robinsons, they will take 2-3 days to arrive at your door.

thats great, thanks for that, just means i will have to wait a little longer untill i can ride, out of interest why are they different part numbers and why is one more expensive??

cheers!

they are different sizes

Originally Posted by silent11

they are different sizes

Yeap, that is why there are two part numbers above.

which one goes which side ie is the longer one on the right or left!!!

cheers

ok figured that out! what tension should i do these bolts up to though??

thanks

Both rear cylinder mounting bolts need to be torqued to 55 Nm.