Carb Diaphragms - where from? - SV650.org

10-08-10, 07:09 PM

So, any pointers as to where I might get some that don't cost more than gold dust?

The cheapest I've found is a ridiculous £34.43 EACH or £22.82 each for pattern ones!

... a bit steep for a tiny piece of rubber!!

C

10-08-10, 07:18 PM

want 2nd hand ones?

10-08-10, 07:22 PM

Yes please!

C

10-08-10, 07:51 PM

i've got a pair from a set of carbs i stripped for parts, need anymore bits from the set?

10-08-10, 07:58 PM

The sliders and needles would be good along with the linkage bars.

... and the CV covers and screws?

Shy bairns get nowt!

C

10-08-10, 08:01 PM

one of the cv covers is gone, but i can strip the lot tomorrow, £20 posted?

10-08-10, 10:20 PM

can I just check that the diaphragms sit perfectly on the tops of the carbs when the CV covers are off and haven't shrunk like the ones I have now?

Cheers,
Carl

10-08-10, 10:26 PM

ahhh, there's the thing...

i just checked the one that had the cv cover missing and it's shrunk

10-08-10, 10:29 PM

Doh!.

Looks like I'm taking the plunge on new ones then

C

10-08-10, 07:09 PM	#1
Berlin Guest Posts: n/a	Carb Diaphragms - where from? So, any pointers as to where I might get some that don't cost more than gold dust? The cheapest I've found is a ridiculous £34.43 EACH or £22.82 each for pattern ones! ... a bit steep for a tiny piece of rubber!! C

10-08-10, 07:18 PM	#2
Razor Guest Posts: n/a	Re: Carb Diaphragms want 2nd hand ones?

10-08-10, 07:22 PM	#3
Berlin Guest Posts: n/a	Re: Carb Diaphragms Yes please! C

10-08-10, 07:51 PM	#4
Razor Guest Posts: n/a	Re: Carb Diaphragms i've got a pair from a set of carbs i stripped for parts, need anymore bits from the set?

10-08-10, 07:58 PM	#5
Berlin Guest Posts: n/a	Re: Carb Diaphragms The sliders and needles would be good along with the linkage bars. ... and the CV covers and screws? Shy bairns get nowt! C

10-08-10, 08:01 PM	#6
Razor Guest Posts: n/a	Re: Carb Diaphragms one of the cv covers is gone, but i can strip the lot tomorrow, £20 posted?

10-08-10, 10:20 PM	#7
Berlin Guest Posts: n/a	Re: Carb Diaphragms - where from? can I just check that the diaphragms sit perfectly on the tops of the carbs when the CV covers are off and haven't shrunk like the ones I have now? Cheers, Carl

10-08-10, 10:26 PM	#8
Razor Guest Posts: n/a	Re: Carb Diaphragms - where from? ahhh, there's the thing... i just checked the one that had the cv cover missing and it's shrunk

10-08-10, 10:29 PM	#9
Berlin Guest Posts: n/a	Re: Carb Diaphragms - where from? Doh!. Looks like I'm taking the plunge on new ones then C

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wanted: Clocks for carb model naked + headlight and carb.	Gazdaman	Stuff Wanted	2	17-03-10 03:50 PM
Carb Help.	Phaelok	Bikes - Talk & Issues	9	01-07-09 02:14 PM
pipes going to carb to carb	sv650nutter149	SV Talk, Tuning & Tweaking	3	07-09-08 10:16 PM
Carb balancing by ear?	ikb	SV Talk, Tuning & Tweaking	16	31-01-08 12:28 PM
When should you renew the carb diaphragms?	Chatterbox	SV Talk, Tuning & Tweaking	11	25-11-05 03:14 AM