Curvey Speedo Not Working - SV650.org

TSM · 31-08-08, 05:36 PM

Ive sorted it now.

As the curvey faired clocks have vent holes in the rear to stop misting up, its possable for condensation to get into the clocks. Yes on my bike (people who know it), i dont have fairing on the front so mine are more prone to the problem but as a guess i would say anyone could have the issue.

After i did all my tests to check that the speedo drive was actualy working, i moved onto the clocks to find that corrosion had damaged a few tracks inside the clocks. One of these being the track that carried the speedo pulse. Where it happened the tracks are so close together, so i found the end points and just bridged them with some wire. Cleaned up any other corrosion that i could see and then used some nail varnish to cover the exposed copper tracks.

All works now.

31-08-08, 05:36 PM	#1
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Curvey Speedo Not Working Ive sorted it now. As the curvey faired clocks have vent holes in the rear to stop misting up, its possable for condensation to get into the clocks. Yes on my bike (people who know it), i dont have fairing on the front so mine are more prone to the problem but as a guess i would say anyone could have the issue. After i did all my tests to check that the speedo drive was actualy working, i moved onto the clocks to find that corrosion had damaged a few tracks inside the clocks. One of these being the track that carried the speedo pulse. Where it happened the tracks are so close together, so i found the end points and just bridged them with some wire. Cleaned up any other corrosion that i could see and then used some nail varnish to cover the exposed copper tracks. All works now. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speedo working, then not, then working???	krhall	SV Talk, Tuning & Tweaking	25	24-04-08 11:35 AM
speedo not working ?	muffin	SV Talk, Tuning & Tweaking	2	16-01-08 08:26 AM
Speedo not working	Elio	SV Talk, Tuning & Tweaking	4	20-02-07 12:32 PM
Speedo not working after new tyers! Help	accessspecialits	SV Talk, Tuning & Tweaking	15	10-04-06 06:34 PM
Speedo not working :o(	PoRk ChOp	SV Talk, Tuning & Tweaking	7	17-05-05 05:58 PM