Orginal Barends and Bolts - SV650.org

18-09-09, 03:03 PM

Silly woman that had the bike before me dropped it, and replaced with aftermarket ones.

I need to fit my handguards, which they don't fit into.

Need a standard set of bar ends and bolts Please Please

PM me Please

Sally..

DarrenSV650S · 18-09-09, 03:13 PM

You've cleared me out of bar ends

What guards did you get?

20-09-09, 02:27 PM

Sorry mate, I may have a bolt and a barend at home from you, will check.

The DL hand guards, had them on last winter, were amazing.

So if anyone has a spare bolt and bar end going about, please reply to this thread or PM me

21-09-09, 05:42 PM

I've got GSXR bar ends but no bolts. They are shorter than the SV ones. Let me know if you want them.

22-09-09, 11:53 AM

It's not the bar ends are the issue. Its the bolts, or lack of length of the bolts I think.

I will check when I go home at the weekend.

22-09-09, 11:55 AM

Oh, I am willing to pay for these, incase you all thoughtI was wantined a freebie.

maviczap · 22-09-09, 12:26 PM

Think I might have a pair of stainless allen bolts of the right length and type in my garage. Will let you know.

I got mine off Ebay, if that's any help?

punyXpress · 23-09-09, 07:22 PM

Might have one - will look when it's light. The other ( better one ) went to a female .orger with a woman's name.
Will let you know.

maviczap · 23-09-09, 08:36 PM

I have 2 lovely countersunk allen bolts in stainless steel.

Drop me a PM with your address

24-09-09, 11:46 AM

£18 quid per clip on from my local (st/d)ealer.
No thanks.

Cheers for the offers guys, PM'd.

18-09-09, 03:03 PM	#1
Sally Guest Posts: n/a	Orginal Barends and Bolts Silly woman that had the bike before me dropped it, and replaced with aftermarket ones. I need to fit my handguards, which they don't fit into. Need a standard set of bar ends and bolts Please Please PM me Please Sally..

18-09-09, 03:13 PM	#2
DarrenSV650S Member Mega Poster Join Date: Jul 2006 Location: Dundee Posts: 4,414	Re: Orginal Barends and Bolts You've cleared me out of bar ends What guards did you get?

20-09-09, 02:27 PM	#3
Sally Guest Posts: n/a	Re: Orginal Barends and Bolts Sorry mate, I may have a bolt and a barend at home from you, will check. The DL hand guards, had them on last winter, were amazing. So if anyone has a spare bolt and bar end going about, please reply to this thread or PM me

21-09-09, 05:42 PM	#4
svdemon Guest Posts: n/a	Re: Orginal Barends and Bolts I've got GSXR bar ends but no bolts. They are shorter than the SV ones. Let me know if you want them.

22-09-09, 11:53 AM	#5
Sally Guest Posts: n/a	Re: Orginal Barends and Bolts It's not the bar ends are the issue. Its the bolts, or lack of length of the bolts I think. I will check when I go home at the weekend.

22-09-09, 11:55 AM	#6
Sally Guest Posts: n/a	Re: Orginal Barends and Bolts Oh, I am willing to pay for these, incase you all thoughtI was wantined a freebie.

22-09-09, 12:26 PM	#7
maviczap Member Mega Poster Join Date: Mar 2007 Posts: 9,097	Re: Orginal Barends and Bolts Think I might have a pair of stainless allen bolts of the right length and type in my garage. Will let you know. I got mine off Ebay, if that's any help? __________________ We're riding out tonight to case the promised land Make everyday count RIP Reeder - Jolly Green Giant and comedy genius

23-09-09, 07:22 PM	#8
punyXpress Member Mega Poster Join Date: Feb 2008 Location: Riding, North Posts: 2,664	Re: Orginal Barends and Bolts Might have one - will look when it's light. The other ( better one ) went to a female .orger with a woman's name. Will let you know. __________________ Was: K2 naked in rapid yellow - gone to a better? place Now: Street Triple R

23-09-09, 08:36 PM	#9
maviczap Member Mega Poster Join Date: Mar 2007 Posts: 9,097	Re: Orginal Barends and Bolts I have 2 lovely countersunk allen bolts in stainless steel. Drop me a PM with your address __________________ We're riding out tonight to case the promised land Make everyday count RIP Reeder - Jolly Green Giant and comedy genius

24-09-09, 11:46 AM	#10
Sally Guest Posts: n/a	Re: Orginal Barends and Bolts £18 quid per clip on from my local (st/d)ealer. No thanks. Cheers for the offers guys, PM'd.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clipons + barends	lazymanc	SV Talk, Tuning & Tweaking	4	13-07-09 10:20 PM
Why do barends matter?	chompy	SV Talk, Tuning & Tweaking	11	04-07-09 09:02 PM
Polished Stainless steel BarEnds	21QUEST	For Sale - SV's and SV related items	6	10-03-08 10:22 PM
Long bolts? Short bolts?	andyaikido	SV Talk, Tuning & Tweaking	6	25-01-06 04:53 PM
Fitting Aftermarket barends	Muttley	SV Talk, Tuning & Tweaking	2	24-04-05 01:50 AM