![]() |
#1 |
Guest
Posts: n/a
|
![]()
im after a rebuild kit for a naked master cylinder and possably a set of piston seals for the front calipers.
anyone got anything going? |
![]() |
![]() |
#2 |
Member
Mega Poster
Join Date: Jul 2008
Location: Sheffield
Posts: 10,274
|
![]()
I got mine from wemoto - seemingly expensive for what they are.
__________________
![]() |
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
they are indeed, slighly different from stock too, no groove in the rings.
|
![]() |
![]() |
#4 |
Member
Mega Poster
Join Date: Jul 2008
Location: Sheffield
Posts: 10,274
|
![]()
Are you sure stock ones have a groove in the rings? Mine must have been changed at somepoint then. I know the dustseals have a groove but not the others.
__________________
![]() |
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
I cant remember if it was the inner or outer, i just remeber thinking at the time they have a groove lol.
|
![]() |
![]() |
#6 |
Member
Mega Poster
Join Date: May 2009
Location: Manchester
Posts: 1,492
|
![]()
i have a set of callipers in excellent condition off a k5 only done 3500 miles ? U can av them for 45 quid dont know if that helps lol ... i dont know what the seals cost but if they are expensive then might be worth just replacing them,
these callipers have never seen a winter.
__________________
2006-2007 -- Gilera Runner 50 - Sold 2007-2008 -- Hyosung XRX125 - Stolen 2009-2010 -- 05 SV650n - CAT - B 2010-Now -- 00 SV650s & 00 SV650n & GSXR 600 K2 |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Is This OK on Brake Seals? | I'm_a_Newbie | Bikes - Talk & Issues | 11 | 07-03-08 07:41 PM |
Brake seals? | bad_hat_harry | SV Talk, Tuning & Tweaking | 8 | 30-11-06 06:14 PM |
Brake seals? | Endfloat | SV Talk, Tuning & Tweaking | 13 | 23-03-06 09:08 PM |
brake seals | timwilky | SV Talk, Tuning & Tweaking | 6 | 08-03-05 10:22 PM |
Brake seals | Scoobs | SV Talk, Tuning & Tweaking | 14 | 12-11-04 03:21 PM |