Engine bolt size? - SV650.org

07-06-11, 10:03 AM

Hi all,
Can someone tell me the size, or where I can source, the left and right engine mounting bolts.
I have full fairing and want to change to half faired.
Ta.
Sent from my HTC Wildfire using Tapatalk

07-06-11, 02:28 PM

Do you not just use the same bolts? When I took the fairings off my thou, I just used the same bolts.

07-06-11, 04:57 PM

don't think so,unless i missed something when i took it apart a while back. it looks like 2 large bolts hold the fairing bracket. i don't think these bolts can be separated from the brackets.

07-06-11, 09:55 PM

http://www.sv650.org/docs/sv650_K3_K...structions.doc

Theres a link to the install guide. I see there are bolts supplied, but im pretty sure I reused the bolts that were holding on my fairing brackets, and my engine hasnt fallen out yet! They torqued up to the required setting no problems.

09-06-11, 05:28 PM

Well, took the fairing off again, took the brackets off and after a fair amount of persuasion, managed to get the bolts off the brackets..these bolts are far too long without the brackets, so I'm gonna need to get the correct standard length bolts.. 650k5

Sent from my HTC Wildfire using Tapatalk

07-06-11, 10:03 AM	#1
johnmaciver32 Guest Posts: n/a	Engine bolt size? Hi all, Can someone tell me the size, or where I can source, the left and right engine mounting bolts. I have full fairing and want to change to half faired. Ta. Sent from my HTC Wildfire using Tapatalk

07-06-11, 02:28 PM	#2
Nelson Guest Posts: n/a	Re: Engine bolt size. Do you not just use the same bolts? When I took the fairings off my thou, I just used the same bolts.

07-06-11, 04:57 PM	#3
johnmaciver32 Guest Posts: n/a	Re: Engine bolt size. don't think so,unless i missed something when i took it apart a while back. it looks like 2 large bolts hold the fairing bracket. i don't think these bolts can be separated from the brackets.

07-06-11, 09:55 PM	#4
Nelson Guest Posts: n/a	Re: Engine bolt size. http://www.sv650.org/docs/sv650_K3_K...structions.doc Theres a link to the install guide. I see there are bolts supplied, but im pretty sure I reused the bolts that were holding on my fairing brackets, and my engine hasnt fallen out yet! They torqued up to the required setting no problems.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bolt size for 'Cr@p Flap'	5v5 rider	SV Talk, Tuning & Tweaking	11	12-10-08 04:00 PM
Help with bolt size	TC3	SV Talk, Tuning & Tweaking	2	20-03-07 06:28 AM
Bolt size	TC3	SV Talk, Tuning & Tweaking	2	12-01-06 02:55 PM
HELP Bolt Size ...	sprocket	SV Talk, Tuning & Tweaking	2	02-07-05 08:11 PM
bolt size please	Quiff Wichard	SV Talk, Tuning & Tweaking	17	20-05-05 09:03 AM

09-06-11, 05:28 PM	#5
johnmaciver32 Guest Posts: n/a	Well, took the fairing off again, took the brackets off and after a fair amount of persuasion, managed to get the bolts off the brackets..these bolts are far too long without the brackets, so I'm gonna need to get the correct standard length bolts.. 650k5 Sent from my HTC Wildfire using Tapatalk