Bolt size for 'Cr@p Flap' - SV650.org

10-10-08, 12:54 PM

Hi all,

Does anyone know what size bolt is needed and where can you pick one up for the cr@p flap between the rear wheel and the shock? I decided to put mine on today after having it removed for some time but can't seem to find the bolt to attach it. It's for a pointy but I think they're the same as the curvy?

Any help would be greatly appreciated.

Thanks

10-10-08, 01:04 PM

Not 100% sure but it is most likely a M6 x 1.25 pitch x 15mm.

northwind · 10-10-08, 01:13 PM

Yup, with a big head IIRC.

10-10-08, 02:06 PM

Cheers guys - you dont suppose know where I could get 1? I've tried busters, fleabay, screwfix, b and q, intobikes and cant find one - I'll keep looking but if you think of anywhere can you let me know?

Cheers

10-10-08, 02:31 PM

Any DIY shop will have them, or you could be tarty like me and get a titanium bolt from Probolt.

10-10-08, 02:37 PM

Quote:

Originally Posted by Dangerous Dave

Any DIY shop will have them, or you could be tarty like me and get a titanium bolt from Probolt.

Cheers mate - thiink I'll get a shiny one from ere - just wanted to check 1st though, I can only see m6x15mmx1.0 pitch (not 1.25 pitch). Am I looking in the wrong place?

Ta

10-10-08, 02:41 PM

Sorry, I was thinking in M8 pitch. Yeah, 1.00 is the standard M6....

Sorry

10-10-08, 02:44 PM

cheers guys - much appreciated - I'm off down to b & q to see if I can get a cheap one!!

Ta-ra

10-10-08, 04:04 PM

Been thinking a bit more, could be a M8 x 1.25 pitch x 15mm....

12-10-08, 12:12 PM

sorted - got one from b&q - it was a m6 but I could only get a 20mm but as it turns out that goes in fine too - so thanks for all your help!!! 9p for the bolt BTW

10-10-08, 12:54 PM	#1
5v5 rider Guest Posts: n/a	Bolt size for 'Cr@p Flap' Hi all, Does anyone know what size bolt is needed and where can you pick one up for the cr@p flap between the rear wheel and the shock? I decided to put mine on today after having it removed for some time but can't seem to find the bolt to attach it. It's for a pointy but I think they're the same as the curvy? Any help would be greatly appreciated. Thanks

10-10-08, 01:04 PM	#2
Dangerous Dave Guest Posts: n/a	Re: Bolt size for 'Cr@p Flap' Not 100% sure but it is most likely a M6 x 1.25 pitch x 15mm. Last edited by Dangerous Dave; 10-10-08 at 01:06 PM.

10-10-08, 01:13 PM	#3
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Re: Bolt size for 'Cr@p Flap' Yup, with a big head IIRC. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

10-10-08, 02:06 PM	#4
5v5 rider Guest Posts: n/a	Re: Bolt size for 'Cr@p Flap' Cheers guys - you dont suppose know where I could get 1? I've tried busters, fleabay, screwfix, b and q, intobikes and cant find one - I'll keep looking but if you think of anywhere can you let me know? Cheers

10-10-08, 02:31 PM	#5
Dangerous Dave Guest Posts: n/a	Re: Bolt size for 'Cr@p Flap' Any DIY shop will have them, or you could be tarty like me and get a titanium bolt from Probolt. Last edited by Dangerous Dave; 10-10-08 at 02:31 PM. Reason: Link Added

10-10-08, 02:41 PM	#7
Dangerous Dave Guest Posts: n/a	Re: Bolt size for 'Cr@p Flap' Sorry, I was thinking in M8 pitch. Yeah, 1.00 is the standard M6.... Sorry

10-10-08, 02:44 PM	#8
5v5 rider Guest Posts: n/a	Re: Bolt size for 'Cr@p Flap' cheers guys - much appreciated - I'm off down to b & q to see if I can get a cheap one!! Ta-ra

10-10-08, 04:04 PM	#9
Dangerous Dave Guest Posts: n/a	Re: Bolt size for 'Cr@p Flap' Been thinking a bit more, could be a M8 x 1.25 pitch x 15mm....

12-10-08, 12:12 PM	#10
5v5 rider Guest Posts: n/a	Re: Bolt size for 'Cr@p Flap' sorted - got one from b&q - it was a m6 but I could only get a 20mm but as it turns out that goes in fine too - so thanks for all your help!!! 9p for the bolt BTW

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with bolt size	TC3	SV Talk, Tuning & Tweaking	2	20-03-07 06:28 AM
Pad Change -bolt size??	Daimo	SV Talk, Tuning & Tweaking	6	20-02-06 09:34 AM
Bolt size	TC3	SV Talk, Tuning & Tweaking	2	12-01-06 02:55 PM
HELP Bolt Size ...	sprocket	SV Talk, Tuning & Tweaking	2	02-07-05 08:11 PM
bolt size please	Quiff Wichard	SV Talk, Tuning & Tweaking	17	20-05-05 09:03 AM