Kawasaki rear brake master cylinders? - SV650.org

01-08-13, 03:32 PM

Anyone know if Kawasaki rear brake master cylinders are generally interchangeable? I've checked a few out and they all seem to be roughly the same. It looks like KHI favour sharing components across multiple bikes a little more than other manufacturers!

I'm wondering whether I can use a ZX-9R item on my old z750e...

Thanks,

Mark

yorkie_chris · 01-08-13, 03:34 PM

Really would not surprise me if you could, generally with this stuff, if it looks similar... it is the same

jambo · 01-08-13, 04:17 PM

If you need any specific measurements I have a J (01) model zx6r in bits in the garage, I can get that checked for you?

Jambo
Sent from my thingie

Sid Squid · 01-08-13, 05:06 PM

Generally speaking as long as the bore is the same, it'll be fine.

02-08-13, 09:50 AM

Quote:

Originally Posted by jambo

If you need any specific measurements I have a J (01) model zx6r in bits in the garage, I can get that checked for you?

Jambo
Sent from my thingie

I may take you up on the offer when I receive my new Tarozzi rearsets in the post. They're supposed to be a direct swap but I have some Raask rearsets on at the moment and can't tell how much butchery was done to make them fit... I've found a few 'improvements' whilst doing up the old Z which don't really stand up to close inspection. I really must take a few pictures, I've had some nice work done so far.

Thanks,

Mark

01-08-13, 03:32 PM	#1
MarkB852 Guest Posts: n/a	Kawasaki rear brake master cylinders? Anyone know if Kawasaki rear brake master cylinders are generally interchangeable? I've checked a few out and they all seem to be roughly the same. It looks like KHI favour sharing components across multiple bikes a little more than other manufacturers! I'm wondering whether I can use a ZX-9R item on my old z750e... Thanks, Mark

01-08-13, 03:34 PM	#2
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Kawasaki rear brake master cylinders Really would not surprise me if you could, generally with this stuff, if it looks similar... it is the same __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

01-08-13, 04:17 PM	#3
jambo Member Mega Poster Join Date: Aug 2003 Location: Croydonia Posts: 5,376	Re: Kawasaki rear brake master cylinders If you need any specific measurements I have a J (01) model zx6r in bits in the garage, I can get that checked for you? Jambo Sent from my thingie __________________ Modern motorcycles are bloody brilliant, enjoy it while we can

01-08-13, 05:06 PM	#4
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Re: Kawasaki rear brake master cylinders Generally speaking as long as the bore is the same, it'll be fine. __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front Master Cylinders 1000 vs 650?	twowheels	SV Talk, Tuning & Tweaking	2	14-05-12 12:34 PM
Master Cylinders upgrading	danf1234	SV Talk, Tuning & Tweaking	2	10-07-11 07:59 PM
Identify these master cylinders!	TOLAROS	SV Talk, Tuning & Tweaking	8	06-02-09 03:54 PM
master cylinders naked vs faired.	Razor	SV Talk, Tuning & Tweaking	14	15-04-08 01:25 PM
Rear brake master cylinders?	svrash	SV Talk, Tuning & Tweaking	2	16-10-06 11:04 PM