SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
Hi all, would like to swap front end but not sure which all kinds will fit to my sv K8 naked ? What year front end to purchase? Going to post picture from ebay that i found,is that exactly what i need? Thanks for any info,advice,link to other discussion topics about this..
![]() GO GO GO |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
Hi, hope these links are of use:
http://lmgtfy.com/?q=fork+swap+site%3Aforums.sv650.org http://forums.sv650.org/showthread.php?t=204773 |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
Do your homework. Then do it again. There's a ton of info out there on this - and some of it is correct!
Go to the mods forum on SVRider - the two sticky threads there have lots of good info all in one place. Ultimately, any front end can be made to fit. The more complete a set up you can get, the easier it is. Front wheel axle and disc size/offset will need to match the new forks and calipers. Stem length is important, and head bearings will need changng. Do you want to change the steering geometry in any particular way? keep as close to standard as possible? keep a functioning steering lock? As i say, research, research, research. Mick.. |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wanted Sv 650 curvy front right hand side front fairing blue | swifty09 | Stuff Wanted | 7 | 28-12-11 08:00 PM |
Injected Front Wheel Axle and Front Master Cyl Brkt | adjblade | Stuff Wanted | 2 | 19-01-11 08:07 AM |
K3 front brake lever, Front indicator (RH), Front Mirror(RH), Bar End (RH) | leegriffiths128 | Stuff Wanted | 0 | 23-07-08 09:11 PM |
Front Discs (pair) for sv650 '99 curvy + Front wheel | mikeSV | Stuff Wanted | 1 | 28-05-08 04:21 PM |
SV650s 2000 model, yellow. I need front central and front right fairing. | OdySV | Stuff Wanted | 0 | 25-02-07 04:47 PM |