Idle Banter For non SV and non bike related chat (and the odd bit of humour - but if any post isn't suitable it'll get deleted real quick).![]() |
![]() |
|
Thread Tools |
![]() |
#1 |
Knob faced knobster
Mega Poster
Join Date: Jan 2005
Location: Haslemere
Posts: 5,422
|
![]()
The throttle cable snapped on my van the other day and i manged to fix it with a electrical terminal block and a couple of washers. So this got me thinking of other things that i'd done like that such as plugging up a hole in the petrol tank of my 125 after an off with some chewing gum.
So any bodges like that as i think we've probably all done the cable tie/ gaffer tape reapirs at some point! (Mods i've put this in IB as it's not strictly bike related)
__________________
2011 Speed Triple 1050 |
![]() |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
I once rivetted a headlamp unit into my MR2 the night before I sold it. (Well, obviously my mate did, as you know I am mechanically inept). We'd taken it apart to change a bulb or something and forgot to put some important fixings back in - rivets were quicker
|
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#4 |
Member
Mega Poster
Join Date: Jul 2006
Location: Dundee
Posts: 4,414
|
![]()
My 125's mirror after a bolt was kicked up by the bike in front and smashed through the mirror
![]() ![]() My selotaped indicator after the SV rolled off its stand ![]() ![]() |
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
THe output bearing on my on the gearbox of my old Chevette was wedged in with bits of coke can.
I did eventually make good and stick a new (reconditioned) gearbox in it. Also the front part of the gear lever snapped on my plag (C50) when I was 16. I didn't have enough money to replace it so I hacksawed the pedal bit of the remaining back part, drilled a hole in it, stuck a bolt through it (wrapped in gaffer tape) and presto it now had a "proper" motorbike gearshift. |
![]() |
![]() |
#6 |
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
![]()
If it falls off it stays off on my bike
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
![]() |
![]() |
![]() |
#7 |
Member
Mega Poster
Join Date: Jul 2006
Location: Dundee
Posts: 4,414
|
![]() |
![]() |
![]() |
![]() |
#8 |
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
![]()
naa, i just keep getting on, silly realy
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
![]() |
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]()
Many years ago I had a Rover 600 as a company car and a few weeks before it had to go back I caught the wing mirror on the wall at my house. Needless to it smashed to bits. Found out the price of a new one (£180!!!!!) so me and a friend fixed it back together with some bumper plastic repair. Electric tape and speaker wire were used for the inards. We then sanded it down and covered it in boot polish to hide the repair lines.
It did pass the inspection and saved me a pretty penny. My favourite bodge though has to be on a old viva (1976 I think) I had as a first car. if you went above fifty miles an hour it would leak in engine fumes through the heating vents. So we taped hover hose to the vents and opened the windows at put them outide at speed!! |
![]() |
![]() |
#10 |
Member
Mega Poster
Join Date: Aug 2005
Location: Tower Hamlets but with Shutters on the windows
Posts: 1,522
|
![]()
HAHAHAHAHAHAHA... what isnt bodged on my bike!!!
![]() |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Leather Repairs | Demonz | Guildford Massive | 13 | 10-05-10 06:13 PM |
GPZ 550 spares and repairs | ljharmitt | Idle Banter | 6 | 10-02-07 11:18 PM |
End can repairs | alexb | Bikes - Talk & Issues | 8 | 08-05-06 08:19 PM |
BOOT REPAIRS?????????? | seasider1975 | Bikes - Talk & Issues | 4 | 07-06-05 09:22 PM |
GPZ 550 spares and repairs | Modi | For Sale - SV's and SV related items | 1 | 09-01-70 02:21 PM |