Indicators

Check the wiring configuration by searching this forum for 'flash-it relay' or 'led indicators' and you should find some more info.

Just found this thread: http://forums.sv650.org/showthread.php?t=84870&page=1

Originally Posted by smdoyle

The fronts require indy spacers which are £4.99 from Motrax, or most bikes shops: http://www.motrax.co.uk/index.php?mo...uct&id_prd=164

Is that for naked and faired ones? Mine is naked.

You only need indy spacers for faired bikes.

Originally Posted by smdoyle

You only need indy spacers for faired bikes.

Nope needed both pairs of spacers, one for the front and one for the rear (tail tidy). This is because the stock indicators are larger and use 2 holes in the bike, the smaller indicators only use one hole so you need the spacers to cover the second hole

They were cheap only £4.99.

Every time I've needed to modify a bike fitted with fast flashing LED indies I've found the Bike-It relays for this job just plug ino the socket in place of the original and do the job as required. Last one I did was on an 02 plate R1 fitted with some tiny little LED indies that used to flash faster than I could count in my head. The Bike-It LED relay calmed them down enough to sail through the MOT.