Remus instructions help needed please.

Hi,

I recently picked up a remus revolution for my sv650s but there are no nstructions.

Does anyone know of online instructions?

any help appreciated.

Cheers,

Joe

Are you removing an original system ie cutting the pipes?

If so there should be instructions on the home page!

HTH

Thanks for replying so fast...

I will be performing some ad-hoc surgery on the original pipe - yes. I couldn't find anything on the main sv650.org site (I think that's what you meant) and the remus site had nothing

Cheers,

Joe

[glade]

I'll see if I have the instructions hanging about in the garage and scan them tomorrow at work. Failing that I could take some pics and do a write up when I get a chance

Oh that would be superb and great and very much appreciated!

Cheers!

Angle grind about 50 mm to the rear of the final weld IIRC.

But wait for fuller instructions from someone whos done it!

[glade]

found them, pm me your email address and I'll send a copy tomorrow

It is basically cut 40mm above weld on original exhaust, slide on connecting tube, slide can onto tube and bolt to foot rest. Attach springs and you're done.

There's a diagram of where to cut, might ease the nerves when you take an angle grinder to your exhaust.

sound advice... I have an angle grinder... I don't have a welder... yet

No need for a welder!!

Just cut off the old pipe and attach the new one with the supplied link pipe!

Simple stuff eh?

HTH

ahhh... no, I meant if I cut in the wrong place