hey...sv650s k3 fiddling... - SV650.org

07-06-05, 03:14 PM

im new to the site here an i got a few enquiries about my bike...

i just bought a sv650s k3 for £2200 with 4400 miles on it, its got a remus race can on it but it doesnt quite fit right.

can i get a twin exhaust system (one either side, high level) for my bike? i havent seen one any where!

i need to restrict the bike to 33bhp (bike test in august) and ive heard i can buy a ecu just to do this, is it true or does it work in conjunction with washers in the inlets etc.

also would pyramid plastics be the best place to get a hugger/belly pan/single seat conversion? thanks.

jay.

07-06-05, 03:15 PM

oh, and wher can i buy the renthal/normal handle bar conversion yoke?

thanks

07-06-05, 03:23 PM

Hello

There are twin systems. Have a look through the gallery bit on the main site page and I'm sure you will come across one or two. Must say Ive seen less on pointy ones than I have on curvey ones.

On the K3 the restriction is ECU based. Dealers sell them and give you the relevant paperwork. They should give you your old ECU as well...

The best seat cowl IMO is OEM Suzuki, bellypans are available from various places. The Poly26 one is very nice but you need to get it sprayed. Worth it as its much cheaper.

Huggers are horrid. Dont get one

Dont forget a tail tidy. Hamicad or the one sold on ebay are popular. NWS tail tidy seems a little more of a pain to fit.

Here's a pic of a sorted K3

Anyway, thats very cheap. £2200

07-06-05, 03:40 PM

I disagree re: fitting a hugger.

The Suzuki hugger fits perfectly as is the colour match and it does what it's meant to.

Best tail tidy is the one sold by Crescent.

07-06-05, 03:41 PM

get a hugger! only my recomendation of course. not law

didnt pyramid plastics burn down earlier in the year/late last year....?

07-06-05, 03:42 PM

beat ya to that one! its got a sort of tail tidy on it, any hoo, i will tell yuo why its £2200....

me and my dad repair bikes, and the sv came in silver, with a smashed fairing, tank, and seat unit, and bent forks.

my dad ended up buying it off the bloke, then sold it to me for what it cost him repaired. whihc was a brand new set of bodywork all from suzuki (surprisingly cheap) new stantions, new tyre and lil bits an pleices. just havent picked up the tank yet.

im only 16 at the mo, hence waiting til aug, hence getting it sorted. but when i went to my dealers, they said they thought they could only get 33bhp ecu's with new bikes??!!

more recent picture will come soon!

07-06-05, 03:43 PM

16

Shouldn't you have a Ped

Underseat exhausts... See here - expensive though

07-06-05, 03:46 PM

Quote:

Originally Posted by Cloggsy

16

Shouldn't you have a Ped

Underseat exhausts... See here - expensive though

did/have sort of.

got hit by a car 3 weeks ago, leaving me with 3x broken foot. i had a mito, whihc my dad bought off me, and now im back to riding a ts50. when my foot heals.

i got a speedfight 100 for rainy days come 17 aswell. this sv's staying dry!

07-06-05, 03:47 PM

and wher can i buy these gpr racing exhausts? i gotta have them!

07-06-05, 07:28 PM

Hadnt heard that about the ECU's

Other people must be getting sorted somehow. Where do all the s/h ECU's go? Daz gets de-restricted in a few days maybe PM him.

Honestly tho huggers are the worst looking thing you can stick on a bike. Pointless abominations unless you have a precious undertray to protect IMO. Especially if its to be a dry weather bike. Thats the only thing I have strong views on. Except blue is best and curveys are horrid of course

Huggers.......blahhhhh!!!!!!!!

If your Dad does up bikes then spraying a Poly26 bellypan shouldnt be a problem, especially if you dont go for candy grand blue.

07-06-05, 03:14 PM	#1
jaysv650 Guest Posts: n/a	hey...sv650s k3 fiddling... im new to the site here an i got a few enquiries about my bike... i just bought a sv650s k3 for £2200 with 4400 miles on it, its got a remus race can on it but it doesnt quite fit right. can i get a twin exhaust system (one either side, high level) for my bike? i havent seen one any where! i need to restrict the bike to 33bhp (bike test in august) and ive heard i can buy a ecu just to do this, is it true or does it work in conjunction with washers in the inlets etc. also would pyramid plastics be the best place to get a hugger/belly pan/single seat conversion? thanks. jay.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sv650s	m.c@live.co.uk	For Sale - SV's and SV related items	0	24-07-08 05:40 PM
been fiddling with mesh again	Quiff Wichard	Photos	20	09-04-08 04:57 PM
insurers - are they fiddling us?	haggis	Bikes - Talk & Issues	15	04-04-07 07:59 PM
SK3 SV650s	pencil shavings	SV Talk, Tuning & Tweaking	4	10-11-06 02:06 PM
sv650s k4	busasean	For Sale - SV's and SV related items	0	20-07-06 10:04 PM

07-06-05, 03:15 PM	#2
jaysv650 Guest Posts: n/a	oh, and wher can i buy the renthal/normal handle bar conversion yoke? thanks

07-06-05, 03:23 PM	#3
Anonymous Guest Posts: n/a	Hello There are twin systems. Have a look through the gallery bit on the main site page and I'm sure you will come across one or two. Must say Ive seen less on pointy ones than I have on curvey ones. On the K3 the restriction is ECU based. Dealers sell them and give you the relevant paperwork. They should give you your old ECU as well... The best seat cowl IMO is OEM Suzuki, bellypans are available from various places. The Poly26 one is very nice but you need to get it sprayed. Worth it as its much cheaper. Huggers are horrid. Dont get one Dont forget a tail tidy. Hamicad or the one sold on ebay are popular. NWS tail tidy seems a little more of a pain to fit. Here's a pic of a sorted K3 Anyway, thats very cheap. £2200

07-06-05, 03:40 PM	#4
legin Guest Posts: n/a	I disagree re: fitting a hugger. The Suzuki hugger fits perfectly as is the colour match and it does what it's meant to. Best tail tidy is the one sold by Crescent.

07-06-05, 03:41 PM	#5
keithd Guest Posts: n/a	get a hugger! only my recomendation of course. not law didnt pyramid plastics burn down earlier in the year/late last year....?

07-06-05, 03:42 PM	#6
jaysv650 Guest Posts: n/a	beat ya to that one! its got a sort of tail tidy on it, any hoo, i will tell yuo why its £2200.... me and my dad repair bikes, and the sv came in silver, with a smashed fairing, tank, and seat unit, and bent forks. my dad ended up buying it off the bloke, then sold it to me for what it cost him repaired. whihc was a brand new set of bodywork all from suzuki (surprisingly cheap) new stantions, new tyre and lil bits an pleices. just havent picked up the tank yet. im only 16 at the mo, hence waiting til aug, hence getting it sorted. but when i went to my dealers, they said they thought they could only get 33bhp ecu's with new bikes??!! more recent picture will come soon!

07-06-05, 03:43 PM	#7
Cloggsy Guest Posts: n/a	16 Shouldn't you have a Ped Underseat exhausts... See here - expensive though

07-06-05, 03:47 PM	#9
jaysv650 Guest Posts: n/a	and wher can i buy these gpr racing exhausts? i gotta have them!

07-06-05, 07:28 PM	#10
Anonymous Guest Posts: n/a	Hadnt heard that about the ECU's Other people must be getting sorted somehow. Where do all the s/h ECU's go? Daz gets de-restricted in a few days maybe PM him. Honestly tho huggers are the worst looking thing you can stick on a bike. Pointless abominations unless you have a precious undertray to protect IMO. Especially if its to be a dry weather bike. Thats the only thing I have strong views on. Except blue is best and curveys are horrid of course Huggers.......blahhhhh!!!!!!!! If your Dad does up bikes then spraying a Poly26 bellypan shouldnt be a problem, especially if you dont go for candy grand blue.