Removing FI Kit from Pointy? - SV650.org

Mej · 23-08-09, 06:46 PM

.

Wideboy · 23-08-09, 07:09 PM

is it the washers?

if so disconnect the carbs from the engine and you will see them sat in the ducts

Mej · 23-08-09, 07:10 PM

.

Wideboy · 23-08-09, 07:16 PM

i don't know much about fuel injection so not sure if you would have slides or not.

im pretty sure you would have washers, the carbs disconnect from the intake ducts the same way as the airbox, get a long screw driver and release the clips (may need a torch to find the screws) and the washers are simply sat on teh top of the ducts, all you do it take them out

basically the washers sit right under the carbs

should have said i was down your way today could have shown you lol

23-08-09, 07:16 PM

Well it won't be any washers in carbs...didn't think pointies had carbs.

FI restrictor is throttle stop I thought.

Wideboy · 23-08-09, 07:17 PM

Quote:

Originally Posted by TazDaz

Well it won't be any washers in carbs...didn't think pointies had carbs.

FI restrictor is throttle stop I thought.

nah they did do carb washers aswell for the pointy

Mej · 23-08-09, 07:25 PM

.

Wideboy · 23-08-09, 07:26 PM

Quote:

Originally Posted by J2UK

well there is definetly no throttle stop, but i am not so sure about these carbs, so to get to them do i need to take the airbox off, not vital now as it is getting too dark to see but i would like to know how to do it though.

Wideboy i still may need you to show me mate, meet up when i get back from cornwall and maybe we can have a gandar?

when you off to cornwall?, im not working at the mo so can pop down tomorrow, will gimi something to do lol

Mej · 23-08-09, 07:29 PM

.

Mej · 23-08-09, 07:29 PM

.

23-08-09, 06:46 PM	#1
Mej Member Mega Poster Join Date: Dec 2008 Posts: 1,418	Removing FI Kit from Pointy? . __________________ Last edited by Mej; 24-07-14 at 02:40 PM.

23-08-09, 07:09 PM	#2
Wideboy Evel Knievel Mega Poster Join Date: Jun 2007 Location: Eastleigh Posts: 4,641	Re: Removing FI Kit from Pointy???? is it the washers? if so disconnect the carbs from the engine and you will see them sat in the ducts __________________ 05 DRZ400E RIP hovis

23-08-09, 07:10 PM	#3
Mej Member Mega Poster Join Date: Dec 2008 Posts: 1,418	Re: Removing FI Kit from Pointy???? . __________________ Last edited by Mej; 24-07-14 at 02:40 PM.

23-08-09, 07:16 PM	#4
Wideboy Evel Knievel Mega Poster Join Date: Jun 2007 Location: Eastleigh Posts: 4,641	Re: Removing FI Kit from Pointy???? i don't know much about fuel injection so not sure if you would have slides or not. im pretty sure you would have washers, the carbs disconnect from the intake ducts the same way as the airbox, get a long screw driver and release the clips (may need a torch to find the screws) and the washers are simply sat on teh top of the ducts, all you do it take them out basically the washers sit right under the carbs should have said i was down your way today could have shown you lol __________________ 05 DRZ400E RIP hovis

23-08-09, 07:16 PM	#5
TazDaz Guest Posts: n/a	Re: Removing FI Kit from Pointy???? Well it won't be any washers in carbs...didn't think pointies had carbs. FI restrictor is throttle stop I thought.

23-08-09, 07:25 PM	#7
Mej Member Mega Poster Join Date: Dec 2008 Posts: 1,418	Re: Removing FI Kit from Pointy???? . __________________ Last edited by Mej; 24-07-14 at 02:40 PM.

23-08-09, 07:29 PM	#9
Mej Member Mega Poster Join Date: Dec 2008 Posts: 1,418	Re: Removing FI Kit from Pointy???? . __________________ Last edited by Mej; 24-07-14 at 02:41 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Removing pointy tank?	ibshort	SV Talk, Tuning & Tweaking	7	25-06-09 11:04 PM
Removing Front Indicators From a Pointy	COLZO	SV Talk, Tuning & Tweaking	4	24-01-09 12:33 AM
Removing the ecu-restrictor from a pointy	shonadoll	SV Talk, Tuning & Tweaking	4	15-10-08 02:58 PM
Removing stock exhaust, K3 Pointy	MiniMac	SV Talk, Tuning & Tweaking	7	21-03-08 06:21 PM
Removing Pointy Lowers	Wadda	SV Talk, Tuning & Tweaking	0	13-03-08 12:35 PM