High level link pipe and can strap - Page 2 - SV650.org

12-01-09, 11:12 PM

It will obviously depend on the can length, but that looks the business. If I end up getting it made I'm thinking I could get it to go behind the rear peg, removing the need to space or remove it.

dizzyblonde · 12-01-09, 11:42 PM

Even YC had to space his pegs out with his not so hi level pipe. I'm not sure you can do it without the need for spacers tbh

yorkie_chris · 12-01-09, 11:45 PM

Yes you can on the micron system with high level (nowt like what you will be making then...) But it needed the pipe extending back about 3" (had to do this so pipe did not interfere with rearsets...)

12-01-09, 11:54 PM

Cheers YC. I've nothing against spacing the peg, so long as it looks ok and doesn't take me too long to do. I'll probably ride for a while without them on and see how it goes. Maybe have a word with my MOT guy just to be sure.
Can anyone recomend some where to get a strap from? My searches have been rubbish.

yorkie_chris · 12-01-09, 11:58 PM

aa16 road n race wouldn't be a bad start.

I can't remember their number... If only they would send me a flourescent keyring with every order! AHHA... AH$hit ... can't find one! lol.

MissYC never seemed to mind one peg being spaced out slightly.

13-01-09, 12:54 PM

Try PJ Engineering for any exhaust parts.

13-01-09, 05:26 PM

Making good use of the new garage/workshop i see Rich! Glad you got an exhaust and look forward to hearing it roar when the weather gets a bit better.

13-01-09, 05:41 PM

Quote:

Originally Posted by svrich

Is it legal to have a rear seat and no rear pegs though?

Never had any issues at MOT time, not even at the strict place I use at times either.

Quote:

Originally Posted by svrich

If I end up getting it made I'm thinking I could get it to go behind the rear peg, removing the need to space or remove it.

Would look a bit odd having the can that far back though.

yorkie_chris · 13-01-09, 05:42 PM

Not if you chop it down

13-01-09, 05:45 PM

Quote:

Originally Posted by yorkie_chris

Not if you chop it down

true...

12-01-09, 11:12 PM	#11
svrich Guest Posts: n/a	Re: High level link pipe and can strap It will obviously depend on the can length, but that looks the business. If I end up getting it made I'm thinking I could get it to go behind the rear peg, removing the need to space or remove it.

12-01-09, 11:42 PM	#12
dizzyblonde Da Cake Boss Mega Poster Join Date: May 2007 Location: On a flying Horse Posts: 9,992	Re: High level link pipe and can strap Even YC had to space his pegs out with his not so hi level pipe. I'm not sure you can do it without the need for spacers tbh __________________ Suzy, yellow 2001 SVS. Kitty, V-Raptor 1000, ZZR1400<<its my bike now Pegasus! Hovis 13.8.75-3.10.09 Reeder 20.7.88-21.3.12

12-01-09, 11:45 PM	#13
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: High level link pipe and can strap Yes you can on the micron system with high level (nowt like what you will be making then...) But it needed the pipe extending back about 3" (had to do this so pipe did not interfere with rearsets...) __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

12-01-09, 11:54 PM	#14
svrich Guest Posts: n/a	Re: High level link pipe and can strap Cheers YC. I've nothing against spacing the peg, so long as it looks ok and doesn't take me too long to do. I'll probably ride for a while without them on and see how it goes. Maybe have a word with my MOT guy just to be sure. Can anyone recomend some where to get a strap from? My searches have been rubbish.

12-01-09, 11:58 PM	#15
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: High level link pipe and can strap aa16 road n race wouldn't be a bad start. I can't remember their number... If only they would send me a flourescent keyring with every order! AHHA... AH$hit ... can't find one! lol. MissYC never seemed to mind one peg being spaced out slightly. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

13-01-09, 12:54 PM	#16
Jester666 Guest Posts: n/a	Re: High level link pipe and can strap Try PJ Engineering for any exhaust parts.

13-01-09, 05:26 PM	#17
jimmy-james Guest Posts: n/a	Re: High level link pipe and can strap Making good use of the new garage/workshop i see Rich! Glad you got an exhaust and look forward to hearing it roar when the weather gets a bit better.

13-01-09, 05:42 PM	#19
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: High level link pipe and can strap Not if you chop it down __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
High Level Link Pipe	Sally	SV Talk, Tuning & Tweaking	28	02-03-12 05:40 PM
High level link pipe	FG1	For Sale - SV's and SV related items	3	05-07-07 07:39 AM
High level link pipe	k146	Stuff Wanted	0	22-04-07 11:04 PM
Help... High level link-pipe...	Cloggsy	SV Talk, Tuning & Tweaking	8	19-11-04 08:10 PM
High Level Link Pipe	Dan_SV	SV Talk, Tuning & Tweaking	13	25-10-04 02:18 PM